Registration
4.
Registrations
4-1.
Clerk sign on / off operation
1)
Clerk sign on operation (Clerk key has the clerk number setting.)
2)
Clerk sign on operation (Clerk key has no clerk number setting.)
R-138
This section describes characteristic registrations of the QT-6600.
Key catch tone, error tone volume can be controlled by the <LEFT/RIGHT ARROW> key.
The following examples illustrate the clerk sign on / off operation.
• When an i-Button key is used, sign on operation can be performed by attaching the clerk
key to the receiver by the appropriate i-Button key.
Note: After initialization, i-Button key ID should be set.
• When a clerk ID number is programmed for the clerk key, sign on operation can be
performed by merely pressing the clerk key on the keyboard or in the clerk pop-up
window.
It is the same procedure that even clerks are assigned as "clerk", "cashier" or "manager."
In case of the store has many clerks to control, you need not allocate all clerk keys on the
keyboard but allocate a few clerk key and program no clerk number one of the clerk key.
1. Just press the appropriate <CLERK> key in the keyboard or
in the clerk pop-up window.
1. Press the <CLERK> key, if you want to display no clerk
number entries.
(clerk pop-up window)