Registration
4-12.
Eat-in / Takeout
Example of receipt image
4-13.
Scanning PLU
To register a scanning PLU item
Not found PLU registration
R-150
This function is used for specifying if the customer eat in the restaurant or takeout.
1. When the <EAT-IN> or <TAKEOUT> key is pressed before finalization, tax exemption
will be applied.
After registering one of these keys, it is impossible to register items except void, cancel,
subtotal, finalize and partial payment (including subtotal according to the currency
conversion.) If you want to release the compulsory, press the <OPEN 2> key.
2. When the <EAT-IN> or <TAKEOUT> key is pressed, tax status change will be applied.
Be sure to program before using this function.
This function is used for registering PLU items by scanner or OBR code <OBR>.
Before using this function, you should allocate the scanning PLU file (file no. 16), connect
a scanner and allocate <OBR> key (function code = 103). Applicable OBR codes are EAN-
13, EAN-8 and UPC-A.
When you scan an item which is not set in the scanning PLU file, not found error (E028)
occurs. In this case, press <NFP> key and perform a department registration. After this
procedure, this not found item is registered by department and is set to the scanning PLU
file.
<NFP> key : function code = 142
1. Just scan the item PLU0100.
2. Enter the OBR code on the label and press the <OBR> key.