Table of Contents
Advertisement
83) Post entry key (Function code 115)
84) Round repeat key (Function code 116)
85) Open check key (Function code 117)
86) Media change key (Function code 118)
87) Seat number key (Function code 119)
88) Eat-in key (Function code 128)
89) Takeout key (Function code 129)
90) Store key (Function code 130)
91) Recall key (Function code 131)
92) Subdepartment key (Function code 133)
93) Subdepartment number key (Function code 134)
94) Department number key (Function code 135)
95) List key (Function code 136)
96) List number key (Function code 137)
QT-6600 Reference Manual
This key is used in a check tracking or clerk interrupt system to indicate the reserved item
of set menu and register it as a fixed item later on.
– Enter post entry
Press this key while the window is opened, the key descriptor appears on the screen and
it is registered as a reserved item.
– Fix post entry
After finishing the set menu registration, move the cursor on to the reserved item, press
this key again, then the appropriate window will be opened to fix it.
This key is used to register the same items which were ordered just before.
Programmability: Refer to page 112 of the programming manual.
This key is used to issue an open check report of an assigned clerk.
Programmability: Refer to page 109 of the programming manual.
This key is used to change media in drawer amounts. Pressing this key enters media change
operation.
This key is used to enter and print seat number.
This key is used to specify if the customer eats in the restaurant. Before closing a
transaction, press this key.
Programmability: Refer to page 111 of the programming manual.
This key is used to specify if the customer takes out items. Before closing a transaction,
press this key for the tax exemption.
Programmability: Refer to page 111 of the programming manual.
This key is used for storing the check number of the registered items. Allocate this key to
the terminal at the drive-through entrance. When this key is pressed, registered item data
will be stored, and then these data will transfer to the youngest check number.
Programmability: Refer to page 111 of the programming manual.
This key is used for recalling the transferred check number by the store key. When you
press this key, the check number will appear in order of the oldest record.
Programmability: Refer to page 113 of the programming manual.
This key is used to register items for the subdepartment.
Programmability: Refer to page 90 of the programming manual.
This key is used to enter subdepartment numbers.
This key is used to enter department numbers.
This key is used to display menu lists.
Programmability: Refer to page 109 of the programming manual.
This key is used to designate list number.
R-37
Advertisement
Table of Contents
