Download Print this page

Casio QT-6600 Programming Manual

Touch screen smart terminal.
Hide thumbs

Advertisement

QT-6600
Touch Screen Smart Terminal
————————————————————————
Programming Manual
Version
1.1 December 2008
c

Advertisement

Chapters

   Related Manuals for Casio QT-6600

   Summary of Contents for Casio QT-6600

  • Page 1

    QT-6600 Touch Screen Smart Terminal ———————————————————————— Programming Manual Version 1.1 December 2008...

  • Page 2

    The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty of any kind with regard to this material, including, but not limited to the implied warranties of marketability and fitness for a particular purpose.

  • Page 3: How To Use This Manual

    Preconditions for reading this manual We suggest two preconditions for reading this manual. 1. A basic understanding of how the QT-6600 series devices must be configured/installed. 2. An understanding of the operational needs of restaurant, bar, fast food and/or general merchandise outlets.

  • Page 4: Table Of Contents

    Contents 1. Machine Initialization ..............P-8 1-1. How to initialize the terminal ..............P-8 1-2. How to initialize the terminal (add / replace one terminal) ....... P-11 1-3. How to flag clear the terminal (or INIT2) ..........P-11 2. Program 5 ................P-14 2-1.

  • Page 5

    5-2-6 Copying PLU descriptors to PLU 2nd ............P-130 5-2-7 Programming function key descriptors .............P-130 5-2-8 Programming PLU descriptors by pulldown group ........P-131 5-3. Programming characters and messages ..........P-132 5-3-1 Programming receipt message, slip message and guest receipt messageP-132 QT-6600 Programming Manual...

  • Page 6

    Contents 5-3-2 Programming text recall message ............P-132 5-3-3 Programming order character link ............P-132 5-3-4 Programming fixed totalizer descriptors ...........P-133 5-3-5 Programming group character ..............P-133 5-3-6 Programming special characters ..............P-134 5-3-7 Programming report headers ..............P-135 5-3-8 Programming endorsement message ............P-135 5-3-9 Programming GT character ..............P-136 5-3-10 Programming customer title ..............P-136 5-3-11 Programming menu title ................P-136 5-3-12 Programming sign off reasons ..............P-138...

  • Page 7

    1. Machine Initialization ..............P-8 1-1. How to initialize the terminal ..............P-8 1-2. How to initialize the terminal (add / replace one terminal) ....... P-11 1-3. How to flag clear the terminal (or INIT2) ..........P-11 QT-6600 Programming Manual...

  • Page 8: Machine Initialization

    Initialization 1. Machine Initialization 1-1. How to initialize the terminal Preparation: 1. All peripheral devices and terminals of this cluster should be turned off. 2. Connect all of the peripheral devices (such as printer, display etc.) to terminal. 3. Connect all terminals by inline. Operation: 4.

  • Page 9

    ——— Select “MANUAL”, if you want to enter IP address manually.* (IP address setting line will appear on the screen.) ——— Press <YES> to continue. * Do not select “IP ADDRESS MANUAL”, if you don’t have enough knowledge about IP address. QT-6600 Programming Manual...

  • Page 10

    Initialization Declare terminal configuration ——— Enter date if it is wrong, in YY-MM-DD order. ——— Enter time if it is wrong, in HH-MM order. ——— Within 12 characters ——— Master / Backup master / Satellite / Self master ——— Enter cluster No. “1” ~ “9”, if using check cluster system. ———...

  • Page 11: How To Initialize The Terminal (add / Replace One Terminal

    5. Turn on this terminal with pressing the <DISP ON/OFF> key. 6. Press <OK> key. 7. Select “1. Flag Clear” and press <YES> key to flag clear. or select “2.Init2” and press <YES> key and enter “8888888888” and <YES> key to Init 2. QT-6600 Programming Manual P-11...

  • Page 12

    Initialization P-12...

  • Page 13

    2-2. Programming memory allocation (hospitality features) ......P-15 2-3. Programming memory allocation (scanning system) ....... P-15 2-4. Programming memory allocation (external devices) ........ P-16 2-5. Programming memory allocation (periodic & work) ......... P-16 2-6. Programming memory allocation file by file ..........P-17 QT-6600 Programming Manual P-13...

  • Page 14: Program 5

    Program 5 2. Program 5 2-1. Programming memory allocation (daily & program) Location: <PGM5> → 1.Memory Alloc → 1.Daily & PGM ——— Title ——— Cashier/clerk record No. (0 ~ 99) ——— Check tracking table record No. (0 ~ 200, ~ 400: using customer func.) ———...

  • Page 15: Programming Memory Allocation (hospitality Features

    ——— Scan Mix 6 match file (file-056) record No. (0~ 99) ——— Add on VMP file (file-040) record No. (0 ~ 999) ——— The remainder of the memory. (bytes) *1: If not “0”, allocate the same number of file-016 automatically. QT-6600 Programming Manual P-15...

  • Page 16: Programming Memory Allocation (external Devices

    Program 5 2-4. Programming memory allocation (external devices) Operation: <PGM5> → 1.Memory Alloc → 4.External Device ——— Title ——— External register buffer file (file-983) record No. (0 ~ rec. No. of file-036) ——— External device serial number file (file-920) record No. (0 ~ 4) ———...

  • Page 17: Programming Memory Allocation File By File

    If you want to allocate files file by file, follow the procedures below. Operation: <PGM5> → 1.Memory Alloc → 6.Individual File ——— Title ——— File name/allocated record No. Designate the appropriate file, enter the record No. and press <YES>. ——— The remainder of the memory. (bytes) QT-6600 Programming Manual P-17...

  • Page 18: Program 4

    Program 5 File Record Max. No. Default Attribu- Allocat- File description Description length of records rec No. tion able System files Physical key table Program Touch screen key table 2280 2280 Program Character key table Program TCP/IP control Program System connection table Program I/O parameter Program...

  • Page 19

    Buffer Mix and match Pgm/Sale (periodic total 1) Sales (periodic total 2) Sales (daily consolidation) for master Sales (periodic 1 consolidation) for master Sales (periodic 2 consolidation) for master Sales (consolidation work) for master Buffer QT-6600 Programming Manual P-19...

  • Page 20

    Program 5 File Record Max. No. Default Attribu- Allocat- File description Description length of records rec No. tion able Shift PLU 9999 Pgm/Sale (periodic total 1) 9999 Sales (periodic total 2) 9999 Sales (daily consolidation) 9999 for master Sales (periodic 1 consolidation) 9999 for master Sales...

  • Page 21

    Buffer Electronic journal (intelligent) 100000 Buffer EJ collection (intelligent) 100000 for master Buffer PLU 2nd @ 9999 Program Scheduler Program Order character Program Batch maintenance 1000 Program Multi EAN link 100000 Program NLU table Program QT-6600 Programming Manual P-21...

  • Page 22

    Program 5 File Record Max. No. Default Attribu- Allocat- File description Description length of records rec No. tion able Menu level character Program Character conversion for CF Program Euro program Program Check-# pop-up window definition Program Clerk pop-up window definition Program Tare table Program...

  • Page 23

    3-3. Programming key allocation (key attribution) ........... P-26 3-4. Programming key allocation (key delete) ..........P-27 3-5. Programming key allocation on a different menu sheet ......P-27 3-6. Programming key allocation on a specific menu sheet ......P-27 QT-6600 Programming Manual P-23...

  • Page 24: Programming Key Allocation

    Program 4 3. Program 4 3-1. Programming key allocation Operation: <PGM4> → 1.Keyboard → 1.Key Assign ——— Function code / Initial character • Method A: Select the function in this list (or enter the function code in the function code list on the next page and press the <YES>...

  • Page 25

    Tax exempt OPE# EXEMPT Operator read / reset Text print OPE X/Z Order character change Text recall ORDER CHAR CHAR Paid out Tray total TRAY TTL Payment PAYMENT Pick up Validation P.UP Plus Worktime PLU# WORKTIME QT-6600 Programming Manual P-25...

  • Page 26: Programming Key Allocation (key Attribution

    Program 4 3-3. Programming key allocation (key attribution) Operation: <PGM4> → 1.Keyboard → 3.Key Attribution → Select the job • Key Shape 1. Select the shape. 2. Designate the key. * In case of assigning double or quadruple key, delete the key which will be hidden by the new big key in advance (both rectangular and circular key).

  • Page 27: Programming Key Allocation (key Delete

    (1) No other key uses the record: Use the record. (2) Other key uses the record: Use the youngest vacant record. Note: You can allocate function key, flat-PLU key, subdepartment key and department key. QT-6600 Programming Manual P-27...

  • Page 28

    Program 4 P-28...

  • Page 29

    Programming character conversion table for CF X/Z data ......P-70 4-1-28 Programming keyboard color theme ............. P-70 4-1-29 Programming keyboard color definition............P-71 4-1-30 Programming TCP/IP ..................P-71 4-1-31 Programming external device serial number..........P-71 4-1-32 Programming additional order control ............P-72 QT-6600 Programming Manual P-29...

  • Page 30: Program 3

    Program 3 4-1-33 Programming FTP login password ..............P-72 4-1-34 Programming FTP server name ..............P-73 4-1-35 Programming FTP translation file ..............P-73 4-1-36 Programming PC Keyboard ................P-73 4-2. Programming clerks ................. P-75 4-2-1 Programming clerk control ................P-75 4-2-2 Programming operation ................

  • Page 31

    Programming direct maintenance ............... P-123 4-4-2 Programming batch maintenance ............... P-123 4-4-3 Programming multi EAN file ................ P-124 4-4-4 Programming NLU file ................. P-124 4-4-5 Programming Non PLU table ..............P-124 4-4-6 Programming scan mix & match ..............P-124 QT-6600 Programming Manual P-31...

  • Page 32: Programming Machine Features

    Program 3 Program 3 4-1. Programming machine features 4-1-1 Programming pulldown group Operation: <PGM3> → 1.Machine Feature → 1.Pulldown Group → Select Pulldown group ——— List title ——— 0 = Status type, 1 ~ 8 = The number of times for stay down, 9 = No limitation ———...

  • Page 33: Programming Set Menu Table

    Operation: <PGM3> → 1.Machine Feature → 3.Arrangement → Select arrange group ——Enter arrange command by character. 4-1-4 Programming batch X/Z report Operation: <PGM3> → 1.Machine Feature → 4.Batch X/Z ——Enter report code (see the next page). QT-6600 Programming Manual P-33...

  • Page 34

    Program 3 Worksheet for batch X/Z report program Description Choice Program code No = 0 Send X data during read report. Yes = 1 No = 0 Send Z data during reset report. (a+b+c) Yes = 2 Yes = 0 Issue report, in case of sending data.

  • Page 35: Programming The General Feature

    Last 1 digit of Last 1 digit of Result Result 25 ~ 74 subtotal/cash change subtotal/cash change 0 ~ 2 75 ~ 99 0 ~ 2 3 ~ 7 3 ~ 7 8 ~ 9 8 ~ 9 QT-6600 Programming Manual P-35...

  • Page 36: Programming The Machine Control 2

    Program 3 4-1-5-2 Programming the machine control 2 Operation: <PGM3> → 1.Machine Feature → 5.General Feature → 2.Machine Control 2 ——— Sequential (Memory No.)/Random PLU No. ——— Sequential (Memory No.)/Department No. ——— Net total includes/excludes add-on and add-in tax. ——— Net total includes/excludes clerk commission. ———...

  • Page 37: Programming The Machine Control 3

    Operation: <PGM3> → 1.Machine Feature → 5.General Feature→ 4.Machine Control 4 ——— All drawers / Drawer assigned to the clerk ——— Send finalize category totals to PC (Hotel server) ——— Accumulate to category totals by cash/cheque/credit ——— Accumulate to category totals by room charge QT-6600 Programming Manual P-37...

  • Page 38: Programming The Print Control

    Program 3 4-1-5-5 Programming the print control Operation: <PGM3> → 1.Machine Feature → 5.General Feature → 5.Print Control ——— 24 Hour / 12 Hour ——— Single item without issuing finalization receipt ——— Print/Not print the quantity ‘1’ of a child item. ———...

  • Page 39: Programming The Report Control 1

    4-1-5-6 Programming the report control 1 Operation: <PGM3> → 1.Machine Feature → 5.General Feature → 6.Report Control 1 ——— These items are included in the fixed totalizer report. ——— Print TA + Tax amount instead of printing Tax exempt. QT-6600 Programming Manual P-39...

  • Page 40: Programming The Report Control 2

    Program 3 4-1-5-7 Programming the report control 2 Operation: <PGM3> → 1.Machine Feature → 5.General Feature → 7.Report Control 2 ——— Skip zero total item. (future use) ——— Print monthly sales average on monthly sales report. ——— Mem Number (by memory number) / Random Code ———...

  • Page 41: Programming The Communication

    4-1-5-9 Programming the hourly sales Operation: <PGM3> → 1.Machine Feature → 5.General Feature → 9.Hourly Sales ——— Hour (00 ~ 23) ——— Minute (00 ~ 59) ——— Hour (00 ~ 23) ——— Minute (00 ~ 59) QT-6600 Programming Manual P-41...

  • Page 42: Programming The Slip/guest

    Program 3 4-1-5-10 Programming the slip/guest Operation: <PGM3> → 1.Machine Feature → 5.General Feature → 10.SLIP/Guest ——— Entire memory: At the top of the transaction / Additional only: At the top of this receipt ——— 00 ~ 99 ——— 00 ~ 99 ———...

  • Page 43: Programming The Message Control

    4-1-5-12 Programming the message control Operation: <PGM3> → 1.Machine Feature → 5.General Feature → 12.Message Control ——— Text logo / Graphic logo QT-6600 Programming Manual P-43...

  • Page 44: Programming The Order Control

    Program 3 4-1-5-13 Programming the order control Operation: <PGM3> → 1.Machine Feature → 5.General Feature → 13.Order Control ——— Print order number in red/ reverse. ——— Order print type: Normal KP/ Ticket ——— Print Logo on KP (ticket). ——— Print text 1 on KP (ticket with slip/ guest intermediate) ———...

  • Page 45: Programming The Set Menu / Condiment

    Fine Dining QTY: Not allow to enter the number of the condiment but allow to select the condiment by LIST staydown within the quantities of main PLU. ——— Add all condiment unit price to main (parent) item. QT-6600 Programming Manual P-45...

  • Page 46: Programming The Check Tracking

    Program 3 4-1-5-15 Programming the check tracking Operation: <PGM3> → 1.Machine Feature → 5.General Feature → 15.CHK Tracking ——— CHK (check) number / TBL (table) number ——— Print “Invoice No.” on receipts / or Not print ——— Print “Invoice No.” while clerk interrupt / or Not print ———...

  • Page 47: Programming The Display Control

    4-1-5-20 Programming Ext. devices Operation: <PGM3> → 1.Machine Feature → 5.General Feature → 20.Ext. Devices ——— Orderman issues guest receipt automatically, ——— Allows bill issuance on orderman. ——— (0 ~ 9) Orderman communication timeout value x 10s QT-6600 Programming Manual P-47...

  • Page 48: Programming Scheduler

    Program 3 4-1-6 Programming scheduler Operation: <PGM3> → 1.Machine Feature → 6.Scheduler ——— Parameter (refer the worksheet below) Worksheet for scheduler program Description Choice Program code : : : : Significant Scheduler start time (00:00 ~ 23:59) numbers : : : : Significant Scheduler end time (00:00 ~ 23:59) numbers...

  • Page 49: Programming Check Print

    Feed direction Reverse = 2 (a+b+c) No = 0 Feed 1 line after printing. Yes = 4 Significant No. of feed lines before printing (0 ~ 9) number Significant Printing offset digits (00 ~ 39) numbers QT-6600 Programming Manual P-49...

  • Page 50: Programming Table Analysis

    Program 3 4-1-8 Programming table analysis Operation: <PGM3> → 1.Machine Feature → 8.Table Analysis ——— Descriptor and parameter (refer the worksheet below) Worksheet for table analysis program Description Choice Program code Always “00” :::::: Significant Minimum check No. of the table group numbers (“0”...

  • Page 51

    • Non-cyclic values and one set of cyclic values (actual values): 7, 14, 14, 14, 15, 14, 14, 15 • Maximum taxable amount in table calculation: $20.07 • Tax system: Tax table with rate • Tax rate: 7.000% • Rounding method: Round off to two decimal places QT-6600 Programming Manual P-51...

  • Page 52

    Program 3 Explanation of VAT & VAT Example 1: Share the amount Tax table programming Tax rate Calculation Primary Secondary (Share rate) type tax status tax status Table 1 10.0000% Table 2 20.0000% → 33.3333% for taxable 1 Table 4 33.3333% VAT &...

  • Page 53

    Calculate tax 1 ----- $0.70 ----- ----- ($10.00 x 8)/(100 +8 +7) Calculate tax 2 CASH ----- ----- ----- $0.61 ($10.00 x 7)/(100 +8 +7) Taxable 1/2 - Tax 1-Tax2 $8.69 $8.69 ($10.00 - $0.70 - $0.61) QT-6600 Programming Manual P-53...

  • Page 54: Programming Void Table

    Program 3 4-1-10 Programming void table Operation: <PGM3> → 1.Machine Feature → 10.Void Table → Use Void Table ——— Descriptor and program value (refer the worksheet below) Worksheet for void table program Description Choice Program code Yes = 0 Return stock value. No = 1 4-1-11 Programming system connection Operation: <PGM3>...

  • Page 55: Programming I/o Parameter

    19200bps = 0, 9600bps = 1 number Using printer connected to RS-232C port: No printer = 99 Significant • TM-U88-IV = 00 • UP-360 = 03 • TM-U220 = 02 numbers • UP-400 = 10 • TM-J7100 = 12 QT-6600 Programming Manual P-55...

  • Page 56

    Program 3 Fifth record (Printer2) Note: Besides flag clear, please turn off and on the printer. Description Choice Program code Using TM-J7100 as a slip printer: Significant Yes = 1, No = 0 number Using RS-232C port for printer: Significant COM4 = 4, COM5 = 5, COM6 = 6 (0, 1 ~ 3, 7 ~ 9: no connection) number Baud rate of the RS-232C port for printer:...

  • Page 57

    Thirteenth through fourteenth record (not used) Description Choice Program code Always “0” Fifteenth record (video box) In case of the video box is connected, enter “400000025”. Sixteenth record (not used) Description Choice Program code Always “0” QT-6600 Programming Manual P-57...

  • Page 58

    Program 3 Seventeenth record (order man) In case of the order man connected, enter “300000011”. Note: Besides flag clear, please turn off and on Eighteenth record (scale) the scale. Description Choice Program code Significant Scale model code numbers Pound/ Kilogram: Significant Pound = 0 (30 LB), Kilogram = 1 (15kg) number...

  • Page 59: Programming Printer Connection

    • In case of selecting LAN printer, select terminal No. that controls the LAN printer. Note: The 19-th through 34-th record of this file are used for the printer definition of order ID change of the Manager function. QT-6600 Programming Manual P-59...

  • Page 60: Programming Time Zone

    Program 3 4-1-14 Programming time zone Operation: <PGM3> → 1.Machine Feature → 14.Time Zone → Select record and field Worksheet for time zone program Description Choice Program code Zone Start Time (Hour) 00 ~23 Zone Start Time (Minute) (00~59) 00 ~ 59 Zone End Time (Hour) (00~23) 00 ~ 23 Zone End Time (Minute) (00~59)

  • Page 61: Programming Time & Attendance

    * This field is used for California rule. In other area, set “99:00”. 4-1-15-2 Programming time & attendance (job code) Operation: <PGM3> → 1.Machine Feature → 15.Time & Attendance → 2.Job Code → Select “Job name” ——— Job name QT-6600 Programming Manual P-61...

  • Page 62: Programming Time & Attendance (employee & Schedule

    Program 3 4-1-15-3 Programming time & attendance (employee & schedule) Operation: <PGM3> → 1.Machine Feature → 15.Time & Attendance → 3.Employee & Schedule → Select “Employee” ——— 0 ~ 999999, leading “0” are ignored. ——— Maximum 16-digits from the leftmost side ———...

  • Page 63: Programming Hourly Item Link

    ——— Rate: 0.01 ~ 9999.99, Amount: 0 ~ 999999 ——— not used ——— not used ——— 0 ~ 9 ——— Coupon random code (0 ~ 9999) ——— PLU, PLU 2nd@, or Subdepartment ——— 0 ~ 99 QT-6600 Programming Manual P-63...

  • Page 64: Programming Idc Link

    Program 3 4-1-18 Programming IDC link Operation: <PGM3> → 1.Machine Feature → 18.IDC Link → Select record ——— PLU, Subdepartment, Department, Function, Pull Down Group, Clerk, Mix & match If you choose Clerk, then whole transaction is stored regardless “Store Data” option. •...

  • Page 65: Programming Auto Program Control

    : : : : Significant File No. numbers No = 0 Broadcast this file (designated by D ) only. Yes = 1 No = 0 Ignore to receive this file (designated by D Yes = 1 QT-6600 Programming Manual P-65...

  • Page 66: Programming Screen Color Control

    Program 3 4-1-21 Programming Screen color control This program controls main display part color of the Screen. Operation: <PGM3> → 1.Machine Feature → 21.Screen color control ——— Parameter (refer the worksheet below) Worksheet for Screen color control 0001-906 (Color pattern selection) Description Choice Program code...

  • Page 67: Programming Australian Features

    ——— Record No. of the swipe key ——— Swipe card without depressing Swipe key. 4-1-23 Programming 22nd address You can program the general function program by code entry. Operation: <PGM3> → 1.Machine Feature → 23.22nd Address QT-6600 Programming Manual P-67...

  • Page 68: Programming Check Window

    Program 3 4-1-24 Programming check window You can program the attribution (characteristics) of check number window. Operation: <PGM3> → 1.Machine Feature → 24.CHK Window → Select job • Select Check/Table Number This program defines the check No. range and key shape of “Add-on new No. type” check No.

  • Page 69: Programming Customer Control

    ——— Tax status (see discount key program) ——— Discount 2 descriptor (0 ~ 16) ——— Discount 2 percent rate (0.00 ~ 99.99) ——— Discount 3 descriptor (0 ~ 16) ——— Discount 3 percent rate (0.00 ~ 99.99) QT-6600 Programming Manual P-69...

  • Page 70: Programming Character Conversion Table For Cf X/z Data

    Program 3 4-1-27 Programming character conversion table for CF X/Z data You can define character conversion table for X/Z data in CF card. Operation: <PGM3> → 1.Machine Feature → 27.CF X/Z Conv ——— Original code (0 ~ 255) / Converted code (0 ~ 255) 4-1-28 Programming keyboard color theme You can define the color theme.

  • Page 71: Programming Keyboard Color Definition

    ——— Not used/ IP address of LAN printer 2 ——— Not used/ IP address of LAN printer 16 4-1-31 Programming external device serial number Operation: <PGM3> → 1.Machine Feature → 31.External Device Number ——— Serial number for Orderman. QT-6600 Programming Manual P-71...

  • Page 72: Programming Additional Order Control

    Program 3 4-1-32 Programming additional order control Operation: <PGM3> → 1.Machine Feature → 32.Add. Order Control → Select “Order printer” ——— In case of using “Add. order control”, select “YES”. ——— Print order with order character. ——— Print quantity in two lines. ———...

  • Page 73: Programming Ftp Server Name

    Record No. of file-002 Hard key code of PC keyboard 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 95 100 105 96 101 97 102 44 45 98 103 QT-6600 Programming Manual P-73...

  • Page 74

    Program 3 Character table Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Space Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code P-74...

  • Page 75: Programming Clerks

    ——— Current only / Complete void / Not allowed ——— The last 2 digit of the sound file number 4-2-2 Programming operation 4-2-2-1 Programming clerk control Operation: <PGM3> → 2.Clerk → 2.Operation → 1.Clerk Control → Select clerk QT-6600 Programming Manual P-75...

  • Page 76: Programming Menu Shift/2nd

    Program 3 4-2-2-2 Programming menu shift/2nd@ Operation: <PGM3> → 2.Clerk → 2.Operation → 2.Menu Shift/2nd@→ Select clerk ——— Allow/Prohibit to register by n-th (n = 1 ~ 15) Menu. ——— Shift PLU after sign on: (1 ~ 8) ——— Menu shift after sign on: (1 ~ 15) ———...

  • Page 77: Programming Function Control 1

    4-2-2-4 Programming function control 1 Operation: <PGM3> → 2.Clerk → 2.Operation → 4.Allowed function 1 → Select clerk 4-2-2-5 Programming function control 2 Operation: <PGM3> → 2.Clerk → 2.Operation → 5.Allowed function 2 → Select clerk QT-6600 Programming Manual P-77...

  • Page 78: Programming Function Control 3

    Program 3 4-2-2-6 Programming function control 3 Operation: <PGM3> → 2.Clerk → 2.Operation → 6.Allowed function 3 → Select clerk 4-2-2-7 Programming function control 4 Operation: <PGM3> → 2.Clerk → 2.Operation → 7.Allowed function 4 → Select clerk P-78...

  • Page 79: Programming Function Control 5

    4-2-2-8 Programming function control 5 Operation: <PGM3> → 2.Clerk → 2.Operation → 8.Allowed function 5 → Select clerk 4-2-2-9 Programming arrangement control Operation: <PGM3> → 2.Clerk → 2.Operation → 9.Arrangement → Select clerk QT-6600 Programming Manual P-79...

  • Page 80: Programming Commission Rate

    Program 3 4-2-2-10 Programming X/Z report control Operation: <PGM3> → 2.Clerk → 2.Operation → 10.Report → Select clerk 4-2-3 Programming commission rate Operation: <PGM3> → 2.Clerk → 3.Commission Rate → Select clerk ——— 0.00 ~ 99.99 (or flat fee) ——— 0.00 ~ 99.99 (or flat fee) 4-2-4 Programming table range Operation: <PGM3>...

  • Page 81: Programming Clerk Control By Range

    Operation: <PGM3> → 2.Clerk → 5.Range → 1.Clerk Control Operation: → Specify Start and End number 4-2-5-2 Programming menu shift / 2nd@ by range Operation: <PGM3> → 2.Clerk → 5.Range → 2.Menu Shift / 2nd@ Operation: → Specify Start and End number QT-6600 Programming Manual P-81...

  • Page 82: Programming Mode Control By Range

    Program 3 4-2-5-3 Programming mode control by range Operation: <PGM3> → 2.Clerk → 5.Range → 3.Mode Control Operation: → Specify Start and End number 4-2-5-4 Programming function control 1 by range Operation: <PGM3> → 2.Clerk → 5.Range → 4.Allowed function 1 Operation: →...

  • Page 83: Programming Function Control 2 By Range

    Operation: <PGM3> → 2.Clerk → 5.Range → 5.Allowed function 2 Operation: → Specify Start and End number 4-2-5-6 Programming function control 3 by range Operation: <PGM3> → 2.Clerk → 5.Range → 6.Allowed function 3 Operation: → Specify Start and End number QT-6600 Programming Manual P-83...

  • Page 84: Programming Function Control 4 By Range

    Program 3 4-2-5-7 Programming function control 4 by range Operation: <PGM3> → 2.Clerk → 5.Range → 7.Allowed function 4 Operation: → Specify Start and End number 4-2-5-8 Programming function control 5 by range Operation: <PGM3> → 2.Clerk → 5.Range → 8.Allowed function 5 Operation: →...

  • Page 85: Programming Arrangement Control By Range

    Operation: <PGM3> → 2.Clerk → 5.Range → 9.Arrangement Operation: → Specify Start and End number 4-2-5-10 Programming X/Z report control by range Operation: <PGM3> → 2.Clerk → 5.Range → 10.Report Operation: → Specify Start and End number QT-6600 Programming Manual P-85...

  • Page 86: Programming Clerk Detail

    Program 3 4-2-5-11 Programming commission rate by range Operation: <PGM3> → 2.Clerk → 5.Range → 11.Commission Rate ——— 0.00 ~ 99.99 ——— 0.00 ~ 99.99 Operation: → Specify Start and End number 4-2-5-12 Programming table range by range Operation: <PGM3> → 2.Clerk → 5.Range → 12.Table range ———...

  • Page 87: Programming Clerk Key Id

    This program defines a clerk to a key in the pop-up window. In case of deleting the assignment, select (Clerk reset). • Key Attribute This program defines the key color, shape and picture of the key in the pop-up window. • Key Delete This program deletes the key in the pop-up window. QT-6600 Programming Manual P-87...

  • Page 88: Programming Key Features

    Program 3 4-3. Programming key features 4-3-1 Programming PLU features Operation: <PGM3> → 3.Key Feature → 1.PLU→ *Select item ——— 000001 ~ 999999 ——— 0 ~ 24 characters ——— 0 ~ 999999 ——— Normal Item / Single Item ——— Normal Item / Condiment / Preparation ———...

  • Page 89: Programming Plu 2nd@ Features

    4. Using character search: You can search an item by its name. Press <SEARCH> key, enter a few characters and press the <ENTER> key. The terminal searches the item includes these characters. After character search, press <UP ARROW> / <DOWN ARROW> shows the next/ previous candidate. QT-6600 Programming Manual P-89...

  • Page 90: Programming Subdepartment Features

    Program 3 4-3-3 Programming subdepartment features Operation: <PGM3> → 3.Key Feature → 3.Sub-Department → Select item ——— 0 ~ 16 characters ——— 0 ~ 999999 ——— Normal Item / Single Item ——— See the Note of the PLU programming section. ———...

  • Page 91: Programming Department Features

    These numbers are defined in the printer connection table ——— 0 ~ 9 ——— 0 ~ 999999 ——— 0, 1 ~ 7, (8, 9: prohibit entry) ——— Record No. of the display area color definition file (file- 906): (12 ~ 99) QT-6600 Programming Manual P-91...

  • Page 92: Programming By Range

    Program 3 4-3-5 Programming by range Operation: <PGM3> → 3.Key Feature → 5.Range → Select the job PLU 2nd@ Sub-Dept Dept 1. Receipt Type 1. Receipt Type 1. Receipt Type 2. Item Type 3. Group Link 1. Group Link 2. Group Link 2.

  • Page 93: Programming Individual Program

    → Select key on the keyboard (The current program is shown.) → Change program if necessary → Enter parameter and press the key Refer to the worksheet of the function keys described on the following pages. QT-6600 Programming Manual P-93...

  • Page 94: Worksheet For Cash, Charge, Credit And Check

    Program 3 4-3-7-1 Worksheet for cash, charge, credit and check Description Choice Program code Yes = 0 Open drawer when the key is pressed. No = 1 No = 0 Clear check after finalization. Yes = 2 (a+b+c) No = 0 Room number compulsory.

  • Page 95: Worksheet For New Balance

    Rate = 2 Yes = 0 Issue receipt while check tracking/clerk interrupt. No = 2 Significant Tax calculation number (0 ~ 2) No = 0, Temporary = 1, Yes = 2 ; ; ; Always “000” QT-6600 Programming Manual P-95...

  • Page 96: Worksheet For Food Stamp Tender, Ebt Tender

    Program 3 4-3-7-3 Worksheet for food stamp tender, EBT tender Description Choice Program code Significant Allowable number of validation printing (“0” means no limitation) number (0 ~9) No = 0 Force validation operation. Yes = 1 Always “0” No = 0 Force slip printing.

  • Page 97: Worksheet For Text Print, Text Recall

    (a+b+c) Staydown “TEXT RECALL WINDOW” No = 0 (effective only for “text recall” key) Yes = 4 Order style: Significant Independent = 0, Follow one item = 1, Follow all items = 2 number Always “00” QT-6600 Programming Manual P-97...

  • Page 98: Worksheet For Check Print

    Program 3 4-3-7-5 Worksheet for check print Description Choice Program code Significant Number of auto back feed lines before printing (0 ~ 9) number ;;;;;; Always “000000” 4-3-7-6 Worksheet for clerk transfer Description Choice Program code 1 = 0 Clerk number 2 = 1 1 Memory number 2 Clerk secret number...

  • Page 99: Worksheet For Tip

    ; ; ; ; ; Always “00000” Maximum value (0 ~ 9) High amount limit specification for entering amounts Number of zeros (0 ~ 9) Always “0” No = 0 Enter numbers after registration. Yes = 1 QT-6600 Programming Manual P-99...

  • Page 100: Worksheet For Plus, Minus, Coupon

    Program 3 4-3-7-11 Worksheet for plus, minus, coupon Description Choice Program code Color link number (record No. of color link file: File-906) Significant (“00 - 11” is treated as “03”.) number Always “0” Multiple validation Yes = 0 (If “No”, only one validation printing is possible.) No = 4 Always “0”...

  • Page 101: Worksheet For Deposit+, Deposit

    Yes = 1 No = 0 Select void reason. Yes = 4 4-3-7-14 Worksheet for check endorsement Description Choice Program code Significant Line number of auto-back feed before printing (0 ~ 9) number ;;;;;; Always “000000” QT-6600 Programming Manual P-101...

  • Page 102: Worksheet For Discount, Premium

    Program 3 4-3-7-15 Worksheet for discount, premium Description Choice Program code Color link number (record No. of color link file: File-906) Significant (“00 ~ 11” is treated as “03”.) number Always “0” Multiple validation Yes = 0 (If “No”, only one validation printing is possible.) No = 4 Always “0”...

  • Page 103: Worksheet For Receipt

    Yes = 4 Significant Issue guest receipt to order printer n (n = 1 ~ 7). number (“0” means issuing to R/J.) Significant Line number of guest bottom message (00 ~ 10): number (“00” means no bottom message.) QT-6600 Programming Manual P-103...

  • Page 104: Worksheet For Non-add, Non-add/ns

    Program 3 4-3-7-17 Worksheet for non-add, non-add/NS Description Choice Program code No = 0 Print characters to order printer 1. Yes = 1 No = 0 Print characters to order printer 2. (a+b+c) Yes = 2 No = 0 Print characters to order printer 3. Yes = 4 No = 0 Print characters to order printer 4.

  • Page 105: Worksheet For Number Of Customer

    Enable operation in Manager mode. No = 2 (a+b+c) Yes = 0 Enable operation in Inline mode. No = 4 : : : Significant Arrangement file number numbers : : : : Significant Arrangement table number numbers QT-6600 Programming Manual P-105...

  • Page 106: Worksheet For Currency Exchange

    Program 3 4-3-7-20 Worksheet for currency exchange Description Choice Program code Significant Define amount symbol. (0 ~ 4) number (“0” means no symbol is printed.) Significant Define foreign currency totalizer. (1 ~ 3) number Significant Rounding: number Round off = 0, cut off = 1, round up = 2 Always “0”...

  • Page 107: Worksheet For Open

    No = 4 Yes = 0 Release tip declaration compulsory. No = 1 Yes = 0 Release eat-in / takeout compulsory. No = 2 (a+b+c) Yes = 0 Release customer credit limit. No = 4 Always “0” QT-6600 Programming Manual P-107...

  • Page 108: Worksheet For Clerk Number

    Program 3 4-3-7-25 Worksheet for clerk number Description Choice Program code Yes = 0 Show clerk pop-up window, when no clerk number is programmed. No = 1 ; ; ; ; ; Always “00000” ; ; ; ; Always “0000” : : : : Clerk secret number (0000 ~ 9999) Significant...

  • Page 109: Worksheet For Cancel

    Significant Record No. of linking pulldown menu group (3). numbers : : : Significant Record No. of linking pulldown menu group (2). numbers : : : Significant Record No. of linking pulldown menu group (1). numbers QT-6600 Programming Manual P-109...

  • Page 110: Worksheet For Tax Exempt

    Program 3 4-3-7-33 Worksheet for tax exempt Description Choice Program code Yes = 0 U.S., Singapore: No = 1 Exempt tax 1 Yes = 0 Exempt tax 2 No = 2 (a+b+c) Yes = 0 Exempt tax 3 No = 4 Significant Canada: number...

  • Page 111: Worksheet For Eat-in / Takeout

    No = 0 Print VAT breakdown. Yes = 1 Yes = 0 Print receipt. No = 2 Significant Tax calculation number (0 ~ 2) No = 0, Temporary = 1, Yes = 2 ; ; ; Always “000” QT-6600 Programming Manual P-111...

  • Page 112: Worksheet For New Check, New/old Check

    Program 3 4-3-7-39 Worksheet for new check, new/old check Description Choice Program code No = 0 Use fullscreen check window. (Only effective for <NEW/OLD> key) Yes = 1 (a+b) No = 0 Treat as <NB> key while depressing without check number. (Only effective for <NEW/OLD>...

  • Page 113: Worksheet For Split Payment

    Always “000000” 4-3-7-47 Worksheet for refund, coupon 2 Description Choice Program code Color link number (record No. of color link file: File-906) Significant (“00 - 11” is treated as “03”.) numbers ;;;;;; Always “000000” ;;;;;; Always “000000” QT-6600 Programming Manual P-113...

  • Page 114: Worksheet For Coupon Number

    Program 3 4-3-7-48 Worksheet for coupon number Description Choice Program code : : : : Significant Random code for coupon. numbers 4-3-7-49 Worksheet for item search Description Choice Program code Significant Color link number (record No. of color link file: File-906) numbers Always “0”...

  • Page 115: Worksheet For Declaration

    4-3-7-53 Worksheet for price change Description Choice Program code No = 0 Permanent price change Yes = 1 Always “0” 4-3-7-54 Worksheet for customer ID number Description Choice Program code No = 0 Show outstanding balance. Yes = 1 QT-6600 Programming Manual P-115...

  • Page 116: Worksheet For Swipe

    Program 3 4-3-7-55 Worksheet for swipe Description Choice Program code No = 0 Prohibit swiping magnetic card Yes = 2 (a+b) No = 0 Activate key function by scanning OBR code. Yes = 4 No = 0 Check expire date. Yes = 2 Significant Digit number of checking version number (1 ~ 9, 0: no checking)

  • Page 117: Worksheet For Function List

    Yes = 1 (a+b) Yes = 0 Display function list. No = 2 Always “0” Significant Free function start record number (01 ~ 99) numbers Always “0” Significant Free function end record number (01 ~ 99) numbers QT-6600 Programming Manual P-117...

  • Page 118: Programming Shift Plu Program

    Program 3 4-3-8 Programming shift PLU program Operation: <PGM3> → 3.Key Feature → 8.Shift PLU→ *Select item ——— 0 ~ 999999 ——— Refer to the “PLU feature program P-78” * Item selection: There are 4 methods to select items. 1. Select by cursor. 2.

  • Page 119: Programming Transaction Key (free Function

    • Parameter field: You can enter parameter and the <Yes> key. If you press the <Yes> key directly, the parameter programming screen of each function is opened. QT-6600 Programming Manual P-119...

  • Page 120: Programming Free Function List

    Program 3 4-3-11 Programming free function list This procedure is used for programming the key located in the function list. Operation: <PGM3> → 3.Key Feature → 11.Free Function list ——— Rec. No. / File No. / Key Descriptor • You can designate the appropriate record before you depress the function key directly.

  • Page 121: Programming Tare Table

    4. Using character search: You can search an item by its name. Press <SEARCH> key, enter a few characters and press the <Enter> key. The terminal searches the item includes these characters. After character search, press <UP ARROW> / <DOWN ARROW> shows the next/ previous candidate. QT-6600 Programming Manual P-121...

  • Page 122

    Program 3 P-122...

  • Page 123: Scanning System

    ——— 0 ~ 16 characters ——— 0 ~ 999999 ——— Max. 99 department ——— Refer to department section. ——— Non PLU item should be programmed as “OPEN PLU”. Refer to 3-3-18. Executing batch maintenance file of the reference manual. QT-6600 Programming Manual P-123...

  • Page 124: Programming Multi Ean File

    Program 3 4-4-3 Programming multi EAN file Operation: <PGM3> → 4.Scanning system → 3.Multi EAN file → Select record → Scan item (code <OBR>) ——— Record-#/ File-#/ Parent item code/ Link item code 4-4-4 Programming NLU (number look up) file Operation: <PGM3>...

  • Page 125

    Programming report headers ..............P-135 5-3-8 Programming endorsement message ............P-135 5-3-9 Programming GT character ................ P-136 5-3-10 Programming customer title ................ P-136 5-3-11 Programming menu title ................P-136 5-3-12 Programming sign off reasons ..............P-138 QT-6600 Programming Manual P-125...

  • Page 126: Program 2

    Program 2 5. Program 2 5-1. Character programming In case of entering characters, the keyboard becomes the character programming key- board. To use this keyboard, you can program item descriptor, clerk name, message etc. 5-1-1 Character programming keyboard When you enter the Program 2 mode, the keyboard becomes a character programming keyboard (shown below).

  • Page 127

    This key is also used for editing the programmed characters. 0 Backspace key Press this key to move the character placed behind. A ESC/SKIP key Press this key to terminate the character programming. QT-6600 Programming Manual P-127...

  • Page 128: Editing Characters

    Program 2 5-1-2 Editing characters Correcting a character just entered OPERATION DISPLAY 1 Enter LENON, instead of LEMON. “L” “E” “N” “O” “N” LENON 1 Press left arrow key three times. LENON 1 Enter “M”. “M” LEMON Correcting and adding/deleting an item descriptor already set OPERATION DISPLAY Designate the item.

  • Page 129: Programming Item Descriptors

    You can enter the character programmed to the subde- partment file (character on receipt). b. If the item is linked to the keyboard or a list, the character (actual keytop character and keytop character in a list window) can be set after step-a. QT-6600 Programming Manual P-129...

  • Page 130: Programming Department Descriptors

    Program 2 5-2-4 Programming department descriptors Operation: <PGM2> → 1.Item Descriptor → 4.Department → Select item ——— 0 ~ 16 characters When you press the <Yes> key, the character programming keyboard (refer to the page P-126) is opened. a. You can enter the character programmed to the depart- ment file (character on receipt).

  • Page 131: Programming Plu Descriptors By Pulldown Group

    Amex card Keytop Free function file Touch screen character key table file 5-2-8 Programming PLU descriptors by pulldown group Operation: <PGM2> → 1.Item Descriptor → 8.Pulldown Group → Select Pulldown Group ——— 0 ~ 24 characters QT-6600 Programming Manual P-131...

  • Page 132: Programming Characters And Messages

    Program 2 5-3. Programming characters and messages 5-3-1 Programming receipt message, slip message and guest receipt message Operation: <PGM2> → 2.Char & Message → 1.Receipt/SLIP Msg ——— Record No. / File No. (description) ——— 0 ~ 40 characters Rec No. Message 1 ~ 8 Receipt logo message...

  • Page 133: Programming Fixed Totalizer Descriptors

    Euro credit in drawer Not used Coupon total Rounding ST transfer void Money declaration counter 5-3-5 Programming group character Operation: <PGM2> → 2.Char & Message → 5.Group Character ——— Record No. / File No. ——— 0 ~ 16 characters QT-6600 Programming Manual P-133...

  • Page 134: Programming Special Characters

    Program 2 5-3-6 Programming special characters Operation: <PGM2> → 2.Char & Message → 6.Special Character ——— Record No. / File No. ——— See below. † n: Program mode number (1 ~ 6) Rec No. Contents Descriptor U.S. Amount symbol (3), @(2), No (2), not used (1), Split pricing (1), Others not used (1), Training filler (1) No.

  • Page 135: Programming Report Headers

    Scan PLU top q’ty 50 Scan PLU inactive Scan PLU stock Scan PLU out of stock 5-3-8 Programming endorsement message Operation: <PGM2> → 2.Char & Message → 8.Endorse Message ——— Record No. / File No. ——— 0 ~ 40 characters QT-6600 Programming Manual P-135...

  • Page 136: Programming Gt Character

    Program 2 5-3-9 Programming GT character Operation: <PGM2> → 2.Char & Message → 9.GT Character ——— Record No. / File No. ——— 0 ~ 16 characters 5-3-10 Programming customer title Operation: <PGM2> → 2.Char & Message → 10.Customer Title ——— Record No. / File No. ———...

  • Page 137

    Title of table layout type check window 15 Title of table layout type check window 16 Title of table layout type check window 17 Title of table layout type check window 18 Title of table layout type check window 19 QT-6600 Programming Manual P-137...

  • Page 138: Programming Sign Off Reasons

    Program 2 5-3-12 Programming sign off reasons Operation: <PGM2> → 2.Char & Message → 12.Sign off Reasons ——— Record No. / File No. P-138...

  • Page 139

    Programming amount or rate to keys ............. P-142 6-2-9 Programming unit price of shift PLU ............... P-143 6-2-10 Programming unit price of pulldown group ............. P-143 6-2-11 Programming PLU unit price and department link ......... P-144 QT-6600 Programming Manual P-139...

  • Page 140: Presetting Date And Time

    Program 1 6. Program 1 6-1. Presetting date and time Presetting time: <PGM1> → Enter Hour and minute (ten sec.) → Press <X> Enter the current time in four (hour, minute) digits or in five (hour, minute, ten second) and press the <X> key (24-hour system). Presetting date:: <PGM1>...

  • Page 141: Programming Plu Unit Price And Plu 2nd Unit Price

    Programming subdepartment unit price Operation: <PGM1> → 1.Unit Price/Qty → 4.Sub-Department → Select item ——— Price: 0 ~ 999999 6-2-5 Programming department unit price Operation: <PGM1> → 1.Unit Price/Qty → 5.Department → Select item ——— Price: 0 ~ 999999 QT-6600 Programming Manual P-141...

  • Page 142: Programming Plu / Plu 2nd@ / Subdepartment / Department Unit Price By Range

    Program 1 6-2-6 Programming PLU / PLU 2nd@ / subdepartment / department unit price by range Operation: <PGM1> → 1.Unit Price/Qty → 6.Range → Select job (PLU / PLU 2nd@ / Subdepartment / Department / PLU-DEPT-PGM*) * This procedure contains PLU programming in PGM 3, so please refer to the appropriate sections. ———...

  • Page 143: Programming Unit Price Of Shift Plu

    • Function keys (CA, CHK, NB, +, –, CPN) Enter the unit price. (0 ~ 999999) • Function keys (%+, %–, CE) Enter the rate without decimal point and add two zeros. (100 ~ 999900; 0.01 ~ 99.99%) QT-6600 Programming Manual P-143...

  • Page 144

    Program 1 P-144...

  • Page 145

    Unit price / quantity ..................P-147 7-2-2 Item descriptor .................... P-148 7-2-3 Character and message ................P-148 7-2-4 Machine feature ..................P-150 7-2-5 Clerk......................P-185 7-2-6 Key feature ....................P-198 7-2-7 Keyboard ..................... P-204 7-2-8 Memory allocation ..................P-204 QT-6600 Programming Manual P-145...

  • Page 146: Program Read General Procedure

    Program 6 7. Program 6 7-1. Program read general procedure Operation: <PGM6> → Select job → Select kind (if necessary) → Specify range (if necessary) Program 6 mode Hierarchy Program 6 Program read report Unit price & quantity PLU unit price PLU 2nd @ Subdepartment unit price Department unit price...

  • Page 147: Program Read Report Sample

    — Unit Price 7-2-1-4. Department — Department descriptor / Record No. / File No. — Unit Price 7-2-1-5. Function key — Function key descriptor / Record No. / File No. — Unit Price, percent rate or conversion rate QT-6600 Programming Manual P-147...

  • Page 148: Item Descriptor

    Program 6 7-2-2 Item descriptor 7-2-2-1. PLU — PLU descriptor / Record No. / File No. 7-2-2-2. PLU 2nd unit price — PLU 2nd descriptor / Record No. / File No. 7-2-2-3. Subdepartment — Subdepartment descriptor / Record No. / File No. 7-2-2-4.

  • Page 149

    7-2-3-10. Customer title — Customer title character / Record No. / File No. 7-2-3-11. Menu title — Record No. / File No. — Menu title * Menu title: Refer to page 137 in PGM 2 mode. QT-6600 Programming Manual P-149...

  • Page 150: Machine Feature

    Program 6 7-2-3-12. Sign off reason — Sign off reason / Record No. / File No. 7-2-4 Machine feature 7-2-4-1. Pulldown group — List title / Record No. / File No. — 0000 (not used) / D / 000000 (not used) —...

  • Page 151

    Year/Month/Day = 0/1, Day/Month/Year = 2, Month/Day/Year = 3 Significant Monetary mode: number (0 ~ 3) 0 = 0, º0 = 1, º00 = 2, º000 = 3 ; ; ; ; ; Always “00000” ; ; ; ; ; Always “00000” QT-6600 Programming Manual P-151...

  • Page 152

    Program 6 Record 0002-022 (not used) Record 0003-022 Description Choice Program code No = 0 Reset consecutive number after daily fixed totalizer reset report Yes = 1 is issued. (a+b) No = 0 Reset invoice number after daily fixed totalizer reset report is Yes = 2 issued.

  • Page 153

    Print clear key operation. Yes = 1 Yes = 0 Print number of customer on header. No = 2 (a+b+c) No = 0 Print PLU No. on receipt. (REG / REF / REG- mode only) Yes = 4 QT-6600 Programming Manual P-153...

  • Page 154

    Program 6 Record 0006-022 Description Choice Program code Yes = 0 Take over the taxable status and commission status of the No = 1 previous item to + / – key. No = 0 Restrict 0 or 5 on the last digit. (a+b+c) Yes = 2 Yes = 0...

  • Page 155

    Tip amount accumulates to the 1st server. Yes = 2 No = 0 Allow rollup condiment unit price. Yes = 1 Always “0” Yes = 0 Print finalized checks on Open Check report. No = 1 ; ; ; Always “000” QT-6600 Programming Manual P-155...

  • Page 156

    Program 6 Record 0008-022 Description Choice Program code Yes = 0 Print gross total. No = 1 Yes = 0 Print net total. No = 2 (a+b+c) Yes = 0 Print cash in drawer. No = 4 Yes = 0 Print cash in drawer difference.

  • Page 157

    Print tax exempt 9. No = 4 Yes = 0 Print taxable amount 10. No = 1 Yes = 0 Print tax 10. No = 2 (a+b+c) Yes = 0 Print tax exempt 10. No = 4 Always “00” QT-6600 Programming Manual P-157...

  • Page 158

    Program 6 Record 0010-022 Description Choice Program code Yes = 0 Print taxable amount 1. No = 1 Yes = 0 (a+b+c) Print taxable amount 2. No = 2 Yes = 0 Print taxable amount 3. No = 4 Yes = 0 Print taxable amount 4.

  • Page 159

    1 = 0 1 Terminal file, 2 Consolidation file 2 = 1 (a+b) Yes = 0 Add terminal file data to the consolidation file after Z operation. No = 4 ; ; ; ; Always “0000” QT-6600 Programming Manual P-159...

  • Page 160

    Program 6 Record 0014-022 Description Choice Program code No = 0 Display fixed totalizer read report. Yes = 1 No = 0 Display transaction read report. Yes = 2 (a+b+c) No = 0 Display department / subdepartment read report. Yes = 4 No = 0 Display PLU / stock read report.

  • Page 161

    1 Memory No. (sequential), 2 Random code 2 = 4 No = 0 With character of X/Z sending data Yes = 1 (a+b) No = 0 With random code of X/Z sending data Yes = 2 QT-6600 Programming Manual P-161...

  • Page 162

    Program 6 Record 0016-022 Description Choice Program code Interval time of hourly report (00 ~ 23 hours) : : : : Significant number Interval time of hourly report (00 ~ 59 minutes): (“0000” means 01:00.) Start time of hourly report (00 ~ 23 hours) : : : : Significant number...

  • Page 163

    Print time on journal. (a+b+c) No = 2 Merge the same department / subdepartment / PLU registration No = 0 on receipt. (Item consolidation) Yes = 4 No = 0 Auto-cut receipt / report. Yes = 1 Always “0” QT-6600 Programming Manual P-163...

  • Page 164

    Program 6 Record 0018-022 Description Choice Program code Significant Maximum printing lines of slip (00 ~ 99) numbers No = 0 Classify registered items by group on slip & guest receipt. Yes = 1 No = 0 Classify registered items by department on slip & guest receipt. (a+b+c) Yes = 2 Classified item printing format:...

  • Page 165

    Receipt logo data: 1 Character type, 2 Graphic type 2 = 1 (a+b) No = 0 Print logo message on X/Z report. Yes = 2 ; ; ; ; Always “0000” ; ; ; ; Always “0000” QT-6600 Programming Manual P-165...

  • Page 166

    Program 6 Record 0021-022 Description Choice Program code No = 0 Print order with order character. Yes = 1 (a+b) No = 0 Print order with amount. Yes = 2 No = 0 Print double bon message. Yes = 1 (a+b) No = 0 Breakdown set menu printing on order.

  • Page 167

    (If “No”, calculate only quantity and stock.) No = 2 (a+b+c) Yes = 0 Print preparation on PLU X/Z report. No = 4 Set menu / Pulldown link type: Significant Fast food = 1, Fine dining quantity = 2 number QT-6600 Programming Manual P-167...

  • Page 168

    Program 6 Record 0026-022 Description Choice Program code Keytops in check No. pop-up window: Subtotal = 0, Clerk = 1, Significant Times from the last order = 2, Times from open = 3 number (0 ~ 3) Print check number line in vertically double sized letter on No = 0 receipt/ guest receipt.

  • Page 169

    Use video system. Yes = 2 ; ; ; Always “000” ; ; ; ; Always “0000” Significant Back light off timer (00 ~ 59 minutes, “00” means never turn off.) numbers Record 0029-022 (not used) QT-6600 Programming Manual P-169...

  • Page 170

    Program 6 Record 0030-022 Description Choice Program code Significant Printer type of order printer 1: Normal KP = 0, Ticket = 2 number Significant Printer type of order printer 2: Normal KP = 0, Ticket = 2 number Significant Printer type of order printer 3: Normal KP = 0, Ticket = 2 number Significant Printer type of order printer 4: Normal KP = 0, Ticket = 2...

  • Page 171

    Auto check starting number (0000 = 0001) * numbers : : : : Significant Auto check ending number (0000 = 9999) * numbers * Be sure that all terminals have common value. * The starting number should be smaller than the ending number. QT-6600 Programming Manual P-171...

  • Page 172

    Program 6 Record 0038-022 (not used) Record 0039-022 Description Choice Program code : : : : Significant Auto customer starting number (“0000” is treated as “0001”.) * numbers : : : : Significant Auto customer ending number (“0000” is treated as “9999”.) * numbers * Be sure that all terminals have common value.

  • Page 173

    : : : Weekly over time pay ratio (0.00 ~ 9.99) Significant “0.00” is treated as “1.00”. numbers : : : Weekly 2nd over time pay ratio (0.00 ~ 9.99) Significant “0.00” is treated as “1.00”. numbers QT-6600 Programming Manual P-173...

  • Page 174

    Program 6 Record 0047-022 Description Choice Program code Printer type of order printer 11: Significant Normal KP = 0, Ticket = 2, number Printer type of order printer 12: Significant Normal KP = 0, Ticket = 2 number Printer type of order printer 13: Significant Normal KP = 0, Ticket = 2 number...

  • Page 175

    7-2-4-8.Table analysis — Table analysis descriptor / Record No. / File No. — Parameter * (Minimum check No.) — Parameter * (Maximum check No.) * Parameter: Refer to the worksheet on page 50 in PGM 3 mode. QT-6600 Programming Manual P-175...

  • Page 176: Printer Connection

    Program 6 7-2-4-9.Tax table — Record No. / File No. — Tax rate — Table maximum value / maximum amount limit — Rounding code — Table attribution 7-2-4-10. Void table — Void reason character / Record No. / File No. —...

  • Page 177

    Significant Job code 3 (00 ~ 99) number (“00” means no select number) Significant Job code 4 (00 ~ 99) number (“00” means no select number) Significant Cashier / clerk record number (00 ~ 99) number QT-6600 Programming Manual P-177...

  • Page 178

    Program 6 7-2-4-16-1. Job Code — Character / Record No. / File No. — Programming (D ) / Pay rate/Overtime pay ratio Description Choice Program code Significant Character (within a 16-digit) (No character means no setting.) character No = 0 Tip declaration compulsory during clock-out operation Yes = 1 Always “0”...

  • Page 179

    Choice Program code Significant Discount type: Discount = 0, Coupon = 1 number Significant Type: Amount = 0, Rate = 2 number Always ‘0” Significant Number of discounts (0 ~ 9: “9” means no limitation) number QT-6600 Programming Manual P-179...

  • Page 180

    Program 6 7-2-4-18. IDC Link — Record No. / File No. / Target Record No.-File No. / Character — Programming (D Description Choice Program code Always “0” Significant Specify IDC file number No link = 0, IDC(1) = 1, IDC(2) = 2, IDC(3) = 3 Always “0”...

  • Page 181

    Print total in sub currency while finalizing. Yes = 1 No = 0 (a+b+c) Print tax in sub currency while finalizing. Yes = 2 No = 0 Print tender in sub currency while finalizing. Yes = 4 QT-6600 Programming Manual P-181...

  • Page 182

    Program 6 7-2-4-21. Auto program control — Record No. / File No. / Parameter * * Parameter: Refer to the worksheet on page 65 in PGM 3 mode. 7-2-4-22. Screen color — Record No. / File No. / Parameter * * Parameter: Refer to the worksheet on page 66 in PGM 3 mode.

  • Page 183

    Always “00” Parameter 4 Description Choice Program code Significant Integer part of selective item 2 discount rate (0 ~ 99) numbers Significant Decimal part of selective item 2 discount rate (00 ~ 99) numbers Always “00” QT-6600 Programming Manual P-183...

  • Page 184

    Program 6 7-2-4-25. CF X/Z conversion table — Record No. / File No. / Parameter 7-2-4-26. Keyboard color theme — Record No. / File No. / Parameter * * Parameter: Refer to the worksheet on page 70 in PGM 3 mode. 7-2-4-27.

  • Page 185: Clerk

    Choice Program code : : : : Significant Commission rate 1 (0.01 ~ 99.99%) numbers (with decimal) : : : : Significant Commission rate 2 (0.01 ~ 99.99%) numbers (with decimal) Flat fee: D = Amount QT-6600 Programming Manual P-185...

  • Page 186

    Program 6 Record 01-067 Description Choice Program code No = 0 Check number compulsory Yes = 4 No = 0 Table number compulsory Yes = 1 No = 0 Number of customer compulsory (a+b+c) Yes = 2 No = 0 Guest receipt automatic issuance (at finalization) Yes = 4 No = 0...

  • Page 187

    Status = 0, Stay down = 1, Stay down for the same receipt = 2 number Status / stay down @ menu sheet assignment: Significant Status = 0, Stay down = 1, Stay down for the same receipt = 2 number Always “0” QT-6600 Programming Manual P-187...

  • Page 188

    Program 6 Record 03-067 Description Choice Program code Yes = 0 Enable to operate in REG mode. No = 1 Yes = 0 Enable to operate in REF mode. No = 2 (a+b+c) Yes = 0 Enable to operate in REG– mode. No = 4 Always “0”...

  • Page 189

    No = 2 (a+b+c) Yes = 0 Enable to operate percent plus. No = 4 Yes = 0 Enable to operate refund. No = 4 Yes = 0 Enable to operate coupon 2. No = 4 QT-6600 Programming Manual P-189...

  • Page 190

    Program 6 Record 05-067 Description Choice Program code Yes = 0 Enable to operate validation. No = 1 Yes = 0 Enable to operate receipt. No = 2 (a+b+c) Yes = 0 Enable to operate check endorse. No = 4 Yes = 0 Enable to operate non-add.

  • Page 191

    Yes = 0 Enable to operate add check. No = 1 (a+b) Yes = 0 Enable to operate separate check. No = 2 Always “0” Yes = 0 Enable to operate coupon No. No = 4 QT-6600 Programming Manual P-191...

  • Page 192

    Program 6 Record 07-067 Description Choice Program code Yes = 0 Enable to operate substitution. No = 1 (a+b) Yes = 0 Enable to operate house Bon. No = 4 Always “0” Yes = 0 Enable to operate operator open check. No = 1 Yes = 0 Enable to operate media change.

  • Page 193

    Enable to operate NFP. No = 2 (a+b) Yes = 0 Enable to operate work time. No = 4 Always “0” Yes = 0 Enable to operate function list. No = 1 ; ; ; ; Always “0000” QT-6600 Programming Manual P-193...

  • Page 194

    Program 6 Record 09-067 Description Choice Program code Yes = 0 Enable to operate arrange group 1. No = 1 Yes = 0 Enable to operate arrange group 2. (a+b+c) No = 2 Yes = 0 Enable to operate arrange group 3. No = 4 Yes = 0 Enable to operate arrange group 4.

  • Page 195

    Enable to issue X/Z report by file. No = 1 Yes = 0 Enable to issue individual key / item X/Z report. No = 2 (a+b+c) Yes = 0 Enable to issue other individual X/Z report. No = 4 QT-6600 Programming Manual P-195...

  • Page 196

    Program 6 Record 11-067 Description Choice Program code :::::: Significant Check No. (0 - 999999) numbers Significant Key type (00 - 83) numbers Significant Key bitmap link (00 - 99) numbers Key type: • No key is assigned = 00 •...

  • Page 197

    : 41 : 42 : 43 • Single size circular key = 50 • Double size circular key : 60 : 61 : 70 : 71 • Quadruple size circular key : 80 : 81 : 82 QT-6600 Programming Manual P-197...

  • Page 198: Key Feature

    Program 6 7-2-6 Key feature 7-2-6-1. PLU — PLU descriptor / Record No. / File No. † — Elementary program — Refer to the field 11-066 † † — Refer to the field 12-066 † — Refer to the field 13-066 †...

  • Page 199

    Yes = 2 No = 0 Open PLU Yes = 4 No = 0 Enable 0 unit price. Yes = 1 No = 0 Enable negative price. (a+b+c) Yes = 2 No = 0 Hash Yes = 4 QT-6600 Programming Manual P-199...

  • Page 200

    Program 6 Description Choice Program code Register by unit price of pulldown main item. No = 0 (i.e. ignore sub item unit price) Yes = 1 No = 0 Use premium item of pulldown set. (a+b+c) Yes = 2 No = 0 Scalable Yes = 4 Significant...

  • Page 201

    Field 16-066 Description Choice Program code Significant Order character record number (00 ~ 99) numbers Field 17-066 Description Choice Program code Number of Bon receipts (1 ~ 9) Significant (If “0”, no Bon is issued.) number QT-6600 Programming Manual P-201...

  • Page 202

    Program 6 Field 20-066 Description Choice Program code 1 = 0 Order printing color: 1 normal : 2 Reverse: UP-400/360 2 = 1 No = 0 Print out to order printer #1. Yes = 1 No = 0 Print out to order printer #2. (a+b+c) Yes = 2 No = 0...

  • Page 203

    — 3rd shift unit price — 4th shift unit price — 5th shift unit price — 6th shift unit price — 7th shift unit price 7-2-6-7. Additional PLU character — PLU No./ PLU descriptor — Additional PLU character QT-6600 Programming Manual P-203...

  • Page 204: Keyboard

    Program 6 7-2-7 Keyboard — Hard key code / Key descriptor / Record No. / File No. / Function code — Key type / Color link / Bitmap link 7-2-8 Memory allocation — File No. / Length / Number of records / DL / P1 / P2 / WK —...

  • Page 205

    Body area character back ground Message window/Error window Frame Body area character back ground Guidance area Body area character back ground Note: These images are printing samples. The displaying color images are different from above samples. QT-6600 Programming Manual P-205...

  • Page 206

    Appendix Color palette for display part (256) (255) (254) (253) (252) (251) (250) (249) (248) (247) (246) (245) (244) (243) (242) (241) (240) (239) (238) (237) (236) (235) (234) (233) (232) (231) (230) (229) (228) (227) (226) (225) (224) (223) (222) (221) (220) (219) (218) (217) (216) (215) (214) (213) (212) (211) (210) (209) (208) (207) (206) (205) (204) (203) (202) (201) (200) (199) (198) (197) (196) (195) (194) (193) (192)

  • Page 207

    Index Index ....................P-207 Program 1 mode Hierarchy ................... P-211 Program 2 mode Hierarchy ................... P-211 Program 4 mode Hierarchy ................... P-211 Program 3 mode Hierarchy ..................P-212 Program 6 mode Hierarchy ..................P-214 QT-6600 Programming Manual P-207...

  • Page 208

    Index clerk number P-25, P-108 clerk pop-up window definition P-22 add check P-25 clerk transfer P-25, P-98 add mode P-35 clerk window P-87, P-197 additional bitmap image P-22 clock-in P-110 additional item program P-121 clock-in / out P-25 additional order control P-22 clock-out P-110 additional PLU character P-22, P-120 clock-out reason P-20...

  • Page 209

    2 P-25, P-107 keyboard P-204 open check P-25, P-109 keyboard bitmap image P-22 operator number P-25 keyboard color definition P-18, P-71, P-184 operator read / reset P-25 keyboard color theme P-18, P-70, P-184 operator X/Z P-108 QT-6600 Programming Manual P-209...

  • Page 210

    Index order character P-21, P-148 round repeat P-25, P-112 order character change P-25, P-114 rounding P-35, P-36, P-37, P-39, P-50, P-61, P-64, P- order character link P-132 order control P-44 order of date P-35 order print P-88, P-90 scalable P-92 scale P-25 scan mix &...

  • Page 211

    P-25 VAT P-25, P-35, P-40 VAT & VAT P-52, P-53 VAT & VAT2 P-53 VAT on Tax P-53 void P-25, P-101 void reason P-19 void table P-54, P-176 worktime P-20, P-25, P-116 X/Z report control P-85 QT-6600 Programming Manual P-211...

  • Page 212: Index

    Index Program 3 mode Hierarchy Pulldown group ————————————————————————————— Machine feature ————— Program 3 Set menu table ——————————————————————————— Arrangement ———————————————————————————— Batch X/Z ————————————————————————————— Machine control 1 ~ 4 ————————— General feature ——————— Print control ————————— Report control 1, 2 ——————— Communication ———————— Hourly sales —————————...

  • Page 213

    Additional PLU character ——————————————————————— Tare table ————————————————————————————— Additional item program ——————————————————————— Direct maintenance ——————————————————————————— Scanning system —— Batch maintenance ————————————————————————— Multi EAN file ———————————————————————————— NLU table ————————————————————————————— Non PLU table ——————————————————————————— Scan Mix & match —————————————————————————— QT-6600 Programming Manual P-213...

  • Page 214: Program 6 Mode Hierarchy

    Index Program 6 mode Hierarchy PLU unit price ———————————— Unit price & quantity ——————— Program read report —— Program 6 PLU 2nd @ ——————————— Subdepartment unit price ————— Department unit price —————— Function key rate/price —————— PLU ———————————————— Item descriptor ———————— PLU 2nd @ ———————————...

  • Page 215

    Endorse message —————————————————————————— GT character ———————————————————————————— Customer title ———————————————————————————— Menu title ————————————————————————————— Sign off reasons ——————————————————————————— Program 4 mode Hierarchy Key assign ——————————————————————————————— Keyboard ——————— Program 4 Key move ————————————————————————————— Key attribute ———————————————————————————— Key delete ————————————————————————————— QT-6600 Programming Manual P-215...

  • Page 216

    MA0901-00501A CASIO COMPUTER CO., LTD. Printed in Japan 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan QT-6600PGM*E...

Comments to this Manuals

Symbols: 0
Latest comments:
  • AJISH Dec 04, 2017 01:26:
    SIR,
    GOOD DAY TO YOU, IN QT 6600 USING TCP/IP (ETHERNET ) WE CAN PRINT ARABIC ? IF ITS POSSIBLE HOW WE CAN DO TAHT