Casio QT 6600 - 64 MB RAM Reference Manual page 63

2-10-2-2. Clock-in operation (2)
Program: Allow to specify job code = YES, Display job code window = NO
(Refer to the page 62 of the programming manual.)
Operation
2-10-2-3. Clock-in operation (3)
Program: Display job code window = YES
Allow to clock-in with non-preset job-code = NO
(Refer to the page 62 of the programming manual.)
Operation
QT-6600 Reference Manual
1. XXXXXX . YY <CLOCK-IN>
When this message appears, press the <YES> key to register
the start of working hours.
Enter the employee No. (within 6 digits), "."(decimal point),
and the job code (2 digits).
XXXXXX . YY
Employee No. Job code
1. XXXXXX <CLOCK-IN>
2. Choose the appropriate Job Code from the CLOCK-IN menu,
and press the <YES> key to register the start of working
hours.
→ Job codes that are programmed in Employee file are displayed.
XXXXXX
Employee No.
R-63