3-3-14. Customer
QT-6600 Reference Manual
You can program (add / modify / delete) the customer (name, address etc.) in the MGR
mode.
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
↑
↓
3. Select "14.Customer" and press the <YES> key.
4. Add customer: Select (New customer) and press the <YES>.
•
—— Customer name (up to 24 characters)
—— Customer title (select from sub menu)
—— Customer address 1 (up to 24 characters)
—— Customer address 2 (up to 24 characters)
—— Customer address 3 (up to 24 characters)
—— Customer address 4 (up to 24 characters)
—— Customer phone No. (up to 12 digits)
—— Customer group (select from sub menu)
5. Press the <ESC> to set and continue to program other
Then (input the customer No. and) press the <YES> in the
next screen.
Modify customer: Select the appropriate customer and press
the <YES>.
Delete customer: Select the appropriate customer and press
the <NO>.
If you swipe a card at this timing, "add customer (new card)"
or "modify customer (already programmed card) is per-
formed.
customer.
R-105