Download Print this page

Casio QT-6600 Installation & Down Recovery Manual

Touch screen smart terminal.
Hide thumbs

Advertisement

QT-6600
Touch Screen Smart Terminal
———————————————————————
Installation &
Down Recovery Manual
Version
1.1 December 2008
c

Advertisement

   Related Manuals for Casio QT-6600

   Summary of Contents for Casio QT-6600

  • Page 1

    QT-6600 Touch Screen Smart Terminal ——————————————————————— Installation & Down Recovery Manual Version 1.1 December 2008...

  • Page 2

    Contents This manual is intended for use as a reference to the QT-6600 system. It provides details to install systems and down recovery. This manual does not describe actual programming, which is covered in the QT-6600 programming manual. This manual consists of the following chapters: 1.

  • Page 3: Table Of Contents

    • After a longtime vacation, initialize the terminal and restore the program data if the terminal is in malfunction, and leave it power on over 12-hours. • QT-6600 consumes batteries for saving data during 2 minutes after turning off the terminal.

  • Page 4: System Installation

    System Installation 1. System installation In this chapter shows how to install QT-6600 systems and peripherals. 1-1. How to load IPL (Initial Program Loading) Normally, IPL is not necessary since the terminal has efficient programmable options to meet your circumstances.

  • Page 5: Remote Ipl (from Remote Host To A Terminal

    Do NOT operate the terminal until the IPL has completed. After IPL completion, you can get the result of the IPL by PC operation. IPL target IPL source IPL Data LAN port defined as FTP server CF slot QT-6600 Installation & Down Recovery Manual...

  • Page 6: 1-2.how To Install The System

    PRN (1) PRN (2) If the terminal cannot recognize the printer(s) correctly, check the dip switch settings on the printer or printer cable and try initialization operation again. Casio printer cable Slip (PRT-CB-8A/-8B) is required for proper recognition of the local printer.

  • Page 7: Master/satellite System With External (remote) Printer

    5. Declare remote printer by programming the printer connection table to all terminals in the cluster (refer to the page 59 of the programming manual.) If your system has LAN printer(s), refer to 1-2-4 section. QT-6600 Installation & Down Recovery Manual...

  • Page 8: The System With Lan Printer

    System Installation 1-2-4. The system with LAN printer 1. Set the printer ID No. (Printer ID No. is an unique number in the cluster). (Refer to the UP-400 user’s manual) 2. Perform “System connection check” in the manager mode. (Refer to 3-3-1. System connection check in the reference manual.) 3.

  • Page 9: System Down And Recovery

    2. System down and recovery In the QT-6600 system, the check tracking system has their master and backup master and remote printer printing system has their master printer and backup master printer. If both masters (or corresponding printers) go down, the check tracking system, cannot continue any processing.

  • Page 10: 2-1.measures To Prevent Trouble

    Needless to say, a backup master is indispensable, since trouble with the master can lead to system down. In the QT-6600 system, both the master and backup master have the check tracking system, the files are updated simultaneously (main-mirror system). Thus, even if either master goes down, the index and detail data remain intact.

  • Page 11: 2-2.master Terminal Failure

    Check tracking master terminal failure 2-2-1-1. Detection of check tracking master terminal failure With the QT-6600 system, the satellite terminal assumes that the master terminal is down when it could not obtain any response to its inquiry. The master terminal is assumed to have gone down in the following cases: 1) The power cable is disconnected from the outlet.

  • Page 12: Master Failure During Check Tracking Operation

    Down Recovery REG C01 10-10-01 12:34 000001 2. Selecting “YES” retries communication with the master. ←Machine No. of master MC #01 Selecting “NO” turns on the master’s down flag and broadcast E108 CHK/TBL Master is removed from system. it to all of the terminals. Then the “Cut off Master/BM icon” is lit.

  • Page 13: Remote Printer Failure

    Remote printer failure 2-2-2-1. Detection of remote printer failure With the QT-6600 system, the satellite terminal assumes that the master printer is down when it could not obtain any response to its inquiry. The master printer is assumed to have gone down in the following cases: 1) The power cable is disconnected from the outlet (the terminal or the printer).

  • Page 14: 2-3.recovery Processing

    2-3. Recovery processing With the QT-6600 system, the processing being performed can be continued by a backup master even when a master goes down. However, at the end of the daily operations, the master which has been down should be restored so that it can operate normally on the next day.

  • Page 15: 2-6.lan Printer Down

    2-6. LAN printer down When the LAN printer goes down perform system connection check (refer to 3-3-1. System connection check in the reference manual) after replacing the LAN printer. QT-6600 Installation & Down Recovery Manual I-15...

  • Page 16

    CASIO COMPUTER CO., LTD. MA0901-00501A 6-2, Hon-machi 1-chome Printed in Japan Shibuya-ku, Tokyo 151-8543, Japan QT-6600IDR*E...

Comments to this Manuals

Symbols: 0
Latest comments: