Clerk Number; Operation Monitor - Casio QT 6600 - 64 MB RAM Reference Manual

(RS-232C printer)
(LAN printer)

3-3-24. Clerk number

Hard key code

3-3-25. Operation monitor

QT-6600 Reference Manual
normal end
error end (error code)
5. Execute this command at the terminal which is connected
normal end
error end (error code)
5. Execute this command at a terminal in the cluster.
You can program clerk number directly to the <CLK#> key in the MGR mode.
You can monitor a clerk's operation by monitoring display.
Note: Do not designate the monitored or monitoring terminal.
with RS-232C printer(s).
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Enter "00" and the clerk number you want to set and press the
appropriate <CLK#> key.
(Entering "000000" clears the clerk number program.)
4. To terminate this step, press the <ST> key.
1. Sign on a clerk (if necessary).
2. Press <Manager> to assign manager mode.
3. Enter "99990000nn (nn: terminal ID No. to monitor)" and
press the <ST> to start operation monitor.
The display shows the screen of the monitored terminal.
4. Press <ESC> twice break the monitoring.
R-113