Manager Operation
3-3-13. Clerk window
R-104
You can program clerk window contents in the MGR mode.
↑
↓
↓
↓
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select "13.Clerk Window" and press the <YES> key.
4. Press the <YES> key to continue.
5. Select the clerk window. If you don't use clerk window,
select "1.(Disable)".
6. Select the clerk to allocate the clerk window. After this
operation, select the appropriate key in the clerk window.
7. Press the <YES> key to set this program.