Table of Contents
Advertisement
4-19.
Table sharing
4-20.
Order character change
4-21.
Item search
QT-6600 Reference Manual
Before using the table sharing function, the following programs are necessary to use this
function.
1) Allocating table sharing key (261).
2) Program to enable table sharing function (refer to the page 46 of the programming
manual.)
Before using this function, the following programs are necessary.
1) Allocating order character file (File-065).
2) Allocating order character change key (252).
3) Linking order character record No.: if necessary
↓
Before using this function, the following programs are necessary.
1) Allocating item search key (246).
2) Searching range: By group / subdepartment / department and its record No.
A1.By pressing <ITEM SEARCH> key, the character program
A2.You can search the item by entering the item descriptor.
B1. By pressing <ITEM SEARCH> key, the pulldown group like
B2. You can select the item in the window.
↓
C1. By pressing <ITEM SEARCH> key, the flat-PLU like key-
C2. You can select the item in the keyboard.
1. In case of designating the same table (check) No. which has
already been occupied, the terminal add the branch No. to the
table No. and open this check as a new check.
(The branch No. (1 ~ 9) is added to prefix to the original table
No.)
1: branch No.
123456: original table (check) No.
1. By pressing <ORDER CHARACTER CHANGE> key, the
order character window appears in the screen.
You can select the appropriate order character in the window.
(If the linking order character record No. is set, the order
character is changed to the linking character automatically.)
keyboard appears on the screen.
window appears on the screen.
board appears on the screen.
R-157
Advertisement
Table of Contents
