Table of Contents
Advertisement
3-3-10. System re-configuration
ß
Cut-off Master or Backup master icon
ß
QT-6600 Reference Manual
This command is one procedure of down recovery. It backs the contents of the system
connection table to the original value.
It should be executed under these conditions:
1) After issuing "Open check report".
2) All terminals are connected and work without any trouble. (Check by system connection
check)
3) No terminal is in registration, collection, consolidation, sending/receiving programs.
4) Activate "System re-configuration" command at the terminal on which the "Cut-off"
icon is lit.
↑
↓
* Perform "System Recofiguration" operation at the terminal that
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select "10. System Re-configuration" and press the <YES>
key.
4. Choose the option "YES (Perform system re-configuration)
/ NO (Abort this procedure)" and press the <YES> key.
shows system error icon
¶
.
R-101
Advertisement
Table of Contents
