System Connection Check - Casio QT-6600 Reference Manual

Manager Operation

3-3-1. System connection check

MGR C01 10-10-01 12:34
Manager Mode

1.System Connection Check

2.Remote On
3.Remote Off
4.Busy Reset
5.Stock Maintenance
6.Drawer for Clerk
7.CHK#(CLK Interrupt)
8.Order ID Change
System Connection Check
INLINE 10/100Mbps
#01 MC#01
RS-232C Printer
#02 MC#02
RS-232C Printer
#03 MC#03
RS-232C Printer
01 LAN Printer
02 ************
Note:
R-90
This command shows the connection status of terminals, and printers.
000000
↓
0.00
Physical ID, Logical ID
RS-232C printer recognition (1: printer (1), 2: printer (2), 4: slip printer
1 2 4
1
*
Un recognized RS-232C printer
:
LAN printer ID, IP address
192168000060
Unrecognized LAN printer
192168000061
0.00
If there is unrecognized terminal there it shows "*" as below.
example) #04 ************
1. Sign on a clerk (if necessary).
2. Press <Manager> to assign manager mode.
3. Select "1. System Connection Check" and press the <YES>
key.
4. After checking the system connection, press the <ESC> key
to return the previous menu.