System Re-Configuration - Casio QT-6600 Reference Manual

3-3-10. System re-configuration

MGR C01 10-10-01 12:34
Manager Mode
3.Remote off
4.Busy Reset
5.Stock Maintenance
6.Drawer for Clerk
7.CHK#(CLK Interrupt)
8.Order ID Change
9.Error Log Print

10.System Re-configuration

ß
Cut-off Master or Backup master icon
System Re-configuration
System Re-configuration
OK?
ß
QT-6600 Reference Manual
This command is one procedure of down recovery. It backs the contents of the system
connection table to the original value.
It should be executed under these conditions:
1) After issuing "Open check report".
2) All terminals are connected and work without any trouble. (Check by system connection
check)
3) No terminal is in registration, collection, consolidation, sending/receiving programs.
4) Activate "System re-configuration" command at the terminal on which the "Cut-off"
icon is lit.
000000
↑
↓
0.00
NO
YES
0.00
1. Sign on a clerk (if necessary).
2. Press <Manager> to assign manager mode.
3. Select "10. System Re-configuration" and press the <YES>
key.
4. Choose the option "YES (Perform system re-configuration)
/ NO (Abort this procedure)" and press the <YES> key.
R-97