Opening And Closing The System; Removing The Bezel - Dell PowerEdge 1900 Systems Owner's Manual

Opening and Closing the System

The system is enclosed by a bezel and cover. To upgrade or troubleshoot the system, remove the bezel
and cover to access the drives and internal system components.

Removing the Bezel

1 Unlock the keylock at the right side of the bezel. See Figure 3-2.
2 While grasping the bezel, push the release latch on top of bezel to the left.
3 Rotate the top of the bezel away from the front panel.
4 Unhook the bottom of the bezel and pull the bezel away from the system. See Figure 3-2.
46
Installing System Components