Veeder-Root Red Jacket Quick-Set Installation, Operation And Service page 58

Appendix A - FDNY Conditions Of Approval
The City of New York Fire Department Conditions of Approval
1. Motor wiring shall be in accordance with the New York City Electrical code for hazardous locations.
2. The installation and use of pumps shall comply with applicable New York City Code, rules and regulations including
3RCNY § 21-20 and/or 3RCNY § 21-21. Manufacturer's and Underwriters Laboratories Inc.'s safety requirements and
limitations shall be complied with.
3. Pumps shall be Underwriters Laboratories Inc. listed and pump manufacturer shall retain follow up service
requirements of Underwriters Laboratories Inc.
4. Equipment shall have secured and shall maintain all required approvals and shall meet all applicable Federal and State
requirements. The use of this product shall be limited to the indicated intent and has not been acceptable for other uses
or applications.
5. Certificate of Approval number shall be plainly and permanently stamped or otherwise fixed upon each pump by the
manufacturer. NOTE: Product must already be identified with Certificate of Approval number before it arrives at New
York City job site.
6. The Certificate of Approval is issued upon condition that the material or equipment's technology does not violate any
patent, trade name, trade secret or other intellectual right.
7. The Fire Department Certificate of Approval does not constitute an endorsement or recommendation of your product
by the Fire Department, but is a certification that your product, as represented, meets the standards as of the date of
issuance.
8. The Fire Department's conditions of approval shall be enumerated in the installation manuals and brochures that will
be provided to New York City buyers, users and installers.
9. The Fire Department reserves the right to withdraw this approval at any time in the event there is a reasonable doubt
that the product does not operate or perform as required by code, the conditions of this resolution or as represented in
your application.
10. As the manufacturer of this equipment/material, you should be aware that any end user who fails to comply with the
condition as outlined in the approval will be subject to enforcement action which may include fines and imprisonment.
Pursuant to §15-220.1 of the New York City Administrative Code, any person who shall knowingly make a false statement
or who shall knowingly falsify or allow to be falsified any Certificate of Approval application shall be punished by a fine of
not less than one thousand dollars ($1,000.00) and not more than five thousand dollars ($5,000.00) or by imprisonment not
to exceed six months, or both, for each such offense.
Certificate of Approval #4939
A-1