Inserting A Pc Card - NEC VERSA TXI Manual
Hide thumbs
Also See for VERSA TXI:
- Manual (8 pages) ,
- Release note (8 pages) ,
- Important information (2 pages)
Table of Contents
Advertisement
Inserting a PC Card
To insert a PC Card, follow these steps.
Align the card so that the 68-pin connector points towards the slot and the arrow
1.
shows on the top face of the card.
Slide the card into either slot. (Install Type III cards in the bottom slot only.) A low
2.
tone followed by a high tone lets you know that the card is fully inserted and
recognized. (If you turn off the sound through the function keys or volume control,
no sound is emitted.)
Other tone sequences such as high, then low tones, indicate that the card is
inserted, but the card type is unknown.
Use the software preinstalled on your system to check PC Card slot availability.
3.
Look for the PC Card icon in the Control Panel or on the right side of the taskbar.
It shows which slot contains a PC Card and which is empty.
6-4 Communicating with Your NEC Versa
Inserting a PC Card
Advertisement
Table of Contents
