Launching The A&D Cd With Windows 2000; Launching The A&D Cd With Windows 98 Se/Windows Me; Application And Driver Cd Dialog Box - NEC VERSA TXI Manual

Launching the A&D CD with Windows 2000
Follow these procedures to launch the Application and Driver CD using NEC
Customize with Windows 2000.
Insert the Application and Driver CD into the CD-ROM drive.
1.
Double click the NEC Customize icon.
2.
Select Application and Driver CD.
3.
Click Install to launch the CD.
4.
The Application and Driver CD dialog box appears.
Note
desktop and then click the CD icon. The Application and Driver CD dialog box appears.
Launching the A&D CD with Windows 98 SE/Windows Me
Follow these procedures to launch the Application and Driver CD using NEC
Customize with Windows 98 and Windows Me.
Insert the Application and Driver CD into the CD-ROM drive. If the CD does not
1.
auto-run, perform steps 2 through 4.
Double click the NEC Customize icon, if necessary.
2.
Highlight Launch Application and Driver CD.
3.
Click Install to launch the CD.
4.
The Application and Driver CD dialog box appears.
Note
desktop and then click the CD icon. The Application and Driver CD dialog box appears.

Application and Driver CD Dialog Box

The Application and Driver CD dialog box consists of the following components.
Selection Tabs — Located just below the title bar, each tab represents a software
!
category. The selection tabs include applications, drivers, utilities, internet
browsers, and the NEC Online Documentation.
Description — Located in the bottom portion of the dialog box, the text describes
!
the selected or highlighted software category or application, driver, etc.
4-10 Using the Operating System and Utilities
If the NEC Customize icon is not available, double click My Computer on the
If the NEC Customize icon is not available, double click My Computer on the