Windows 2000 Power Schemes - NEC VERSA TXI Manual

Windows 2000 Power Schemes

Use the Power Schemes options to define the appropriate Power scheme for your
system, and to set timeouts for standby, LCD panel, and hard disk. Define parameters
for your system when running under AC (plugged in) or DC (running on batteries)
power.
Parameter
Power Schemes
Turn off monitor
(Plugged in)
Turn off monitor
(Running on batteries)
Turn off hard disks
(Plugged in)
Turn off hard disks
(Running on batteries)
System standby
(Plugged in)
System standby
(Running on batteries)
System hibernates
(Plugged in and
Running on batteries)
Power Schemes — Defines the most appropriate power scheme for your computer.
!
Turn off monitor — Selects the time delay before your LCD panel turns off.
!
Turn off hard disks — Selects the time delay before your hard disk(s) power down.
!
3-16 Using the BIOS Setup Utility
Power Schemes
Default Setting
Portable/Laptop
After 15 Minutes
After 5 Minutes
After 30 Minutes
After 3 Minutes
After 20 Minutes
After 5 Minutes
After 1 Hour
Alternate Setting(s)
Home/Office Desk,
Presentation, Always On,
Minimal Power
Management, Max.
Battery
1, 2, 3, 5, 10, 15, 20, 25,
30, 45 minutes; 1, 2, 3, 4,
5 hours; Never
1, 2, 3, 5, 10, 15, 20, 25,
30, 45 minutes; 1, 2, 3, 4,
5 hours; Never
3, 5, 10, 15, 20, 25, 30, 45
minutes; 1, 2, 3, 4, 5
hours; Never
3, 5, 10, 15, 20, 25, 30, 45
minutes; 1, 2, 3, 4, 5
hours; Never
1, 2, 3, 5, 10, 15, 20, 25,
30, 45 minutes; 1, 2, 3, 4,
5 hours; Never
1, 2, 3, 5, 10, 15, 20, 25,
30, 45 minutes; 1, 2, 3, 4,
5 hours; Never
10, 15, 20, 25, 30, 45
minutes; 1, 2, 3, 4, 5, 6
hours; Never