Charging The Battery - NEC VERSA TXI Manual

Insert the new battery as follows:
5.
!
!
!
!
A – Battery Bay Connectors
B – Battery Bay Release Latch
Turn over the system.
6.

Charging the Battery

Charge the primary battery and optional secondary (VersaBay IV) battery by simply
connecting your NEC Versa TXi system to an AC power source. To monitor the
charging activity, observe the battery charging LED on the front of the system. The
battery charging LED lights as follows:
Lights amber when the primary battery is charging.
!
Blinks amber if the primary battery encounters an error while charging.
!
Lights green when the secondary battery is charging.
!
Blinks green if the secondary battery encounters an error while charging.
!
Locate the alignment grooves on either edge of the battery.
Locate the alignment grooves inside the battery bay.
Align the grooves on the battery with the grooves in the bay.
Slide the battery into the bay until securely locked into place.
Inserting the battery
C – Alignment Grooves
D – Standard Lithium-Ion Battery
Getting Started 2-11