NEC VERSA TXI Manual page 83

In the NEC Product Recovery utility screen, use the VersaGlide touchpad to
4.
choose Full Disk Drive to restore your hard disk drive to its original factory
installed state.
applications installed on your system.
Read the Warning screen.
5.
A warning displays indicating that your hard disk is about to be erased.
Select Continue to proceed to perform a Full Disk Drive restore.
6.
If you select Back, the recovery utility returns to the prior screen, which has an exit
option.
If you select Continue, a screen with progress bars displays and lets you know the
progress of the recovery.
process.
When the recovery process is complete, you are prompted to remove the CD from
7.
the CD-ROM drive and reboot your system.
Press , click Reboot, or press
8. Enter
A series of hardware detection screens display, the system reboots and the
Windows Setup screen appears. Follow the on-screen instructions to set up
Windows.
You are required to reenter your Microsoft license number.
Choose your restore option carefully to prevent losing data and
Do not turn off or disturb the system during the recovery
to reboot your system.
Alt-R
Using the Operating System and Utilities 4-15