Power Button; Keyboard Panel - NEC VERSA TXI Manual

Power Button

The Power button is a "smart" switch, meaning that it recognizes when the system is in
Standby mode. If in Standby mode, you cannot power off until you press the Power
button to resume operation. (The BIOS parameter "System Switch" must be set to
"Sleep.")
Put the unit in Standby mode when you need to be away from your system for a short
period of time and want to return to where you left off. Standby mode shuts down all
devices in the system while retaining data and system status. Go to Start, Shut Down,
Standby to put your system into Standby mode.
Use the Power button in the following ways:
— Press the Power button to power on.
— Press the Power button to resume from Standby mode and proceed with normal
operation.
— Hold the Power button in place for 4 or more seconds to power off the system
(power override). Only use this option if you cannot power off your system
using Start, Shut Down.

Keyboard Panel

The NEC Versa notebook's keyboard offers the following features, which are described
after the figure.
A – Function Keys
B – Numeric Keys
C – Typewriter Keys
1-8 Introducing Your NEC Versa
Keyboard
D – Control Keys
E – Cursor Control Keys