Slamtec Phoebus User Manual page 8

complete the account registration and login，as shown below.
2. Connect to Robot Base
Click "File-Robot" in the menu-toolbar area of RoboStudio, and a docking window
named Robot will appear on the left side of the workspace, as shown below. The user
can connect or disconnect to the robot base through this window.
Right click the whitespace of the robot list, and enter the IP address and port number
in the prompt dialog box as shown in the upper right corner.
Connect the computer through a network adapter to the SSID of the Phoebus chassis
mentioned above (the SSID can be viewed on the machine label). Enter the IP address
192.168.11.1 (note that your wireless network adapter IP address should be set to
automatically obtain using DHCP) and 1445 Port Number in the pop-up dialog box by
default. Then click "Connect" to connect to the chassis...
Build Map
Once connected successfully, the major work area will show the robot, map
information and its status. The robot name will turn to green and the robot status will
turn to Connected as shown in the following figure.
8 / 32