Slamtec Phoebus User Manual page 3

Configuration&Usage
Unpack
After receiving the Phoebus robot,please check whether the packaging box is intact as
shown in the left picture below, and whether the product name of the outer box is
Phoebus. If the whole package is intact, please cut the packing straps through and
remove all of them, as shown in the following right figure.
Open the box and the inside is shown in the following left figure, please take the large
top protective EPE out of the box and then hold the payload tray to lift the robot base
out of the box.
Please take out the charging station and related cables out the charging station box
.
3 / 32