Table of Contents
Advertisement
4. Press the Suspend button again to resume Active mode
on the Versa.
NOTE: Connecting an external mouse automatically
disables the VersaTrack ball.
NOTE: For instructions on connecting an external
mouse to the docking station, see the user's guide
that came with your docking station.
Monitor
You can add a standard external monitor to your Versa P
using the Plug and Play feature. You need a display signal
cable (usually provided with the monitor). One end of the
cable must have a male 15-pin connector for the system.
(See the back of the Versa P, behind the left-rear cover, for
the monitor connector.)
Follow these steps to connect an external monitor to your
Versa P.
Check that the Versa is in Suspend mode or powered off
1.
and the monitor power switch is turned off.
NOTE: The Versa must be in Suspend mode or
powered off while the monitor is being connected. If
power remains Active, the Versa won't recognize
the new display type.
Adding Options 3-19
Advertisement
Table of Contents
