NEC VERSA P Manual page 117

Hide thumbs Also See for VERSA P:
Table of Contents

Advertisement

Setting Switch
8
Functions
This chapter provides switch setting information that you
might need to configure your system for a particular appli-
cation or system requirement.
The switches that configure your system are the System
Configuration switches, a block of four switches on the
system beneath the memory compartment cover. If you
want to modify the system BIOS, you must change one of
the System Configuration switch settings.
The following figure shows the factory settings and func-
tions of the System Configuration switches.
Check the switch settings for your particular requirements.
If you need to change the settings, use the procedure that
follows the figure.
BIOS REPROGRAM
*ON: Prevents BIOS
OFF: Allows BIOS
RESERVED
1
ON
OFF
reprogramming
reprogramming
2
3
4
RESERVED
KEYBOARD
*ON: U.S.
OFF: International
Switch settings
Setting Switch Functions 8-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versa p series

Table of Contents