Table of Contents
Advertisement
6
Problem Solving
The Versa P has a built-in checking program that automati-
cally tests its components when you turn the system power
on. This diagnostic test is called the Power-On Self-Test
(POST). If the system finds a problem during the POST, the
system displays an error message. If this happens, follow
the instructions in the POST error message table later in
this chapter.
Read through this chapter to familiarize yourself with what
to do if you encounter a problem.
If the screen is blank, the instructions do not help, or an
error message does not appear, use the information in this
chapter to determine and fix the problem. The problem is
often one you can solve yourself.
PROBLEM CHECKLIST
First check the items in the following list. If these items do
not help, see the table that follows the list.
Power is on to the computer.
The electrical outlet to which your AC adapter is
connected is working. Test the outlet by plugging in
a lamp or other electrical device.
All cables are tightly connected.
The display setting is configured correctly.
The display's brightness control is adjusted properly.
If you do not have the AC adapter connected, check that
the battery pack is properly inserted and fully charged.
Problem Solving 6-1
Advertisement
Table of Contents
