Table of Contents
Advertisement
3.
Install the memory card as follows.
Align the memory card connector with the connector
in the system.
Insert the card connector by sliding it into the system
connector. Press the card to make sure it is securely
seated.
4.
Replace the disk compartment cover.
Replace the memory compartment cover.
5.
Run Auto Setup to check the new configuration. Auto
6.
Setup should show a blinking arrow next to the extended
memory field. The new value should reflect the increase
in memory. (Refer to "Using Auto Setup" in this guide.)
Memory
Card
Inserting a memory card
Adding Options 3-9
Advertisement
Table of Contents
Need help?
Do you have a question about the VERSA P and is the answer not in the manual?