Table of Contents
Advertisement
Mouse
You can add an external mouse to your Versa P to use in
place of the VersaTrack ball for moving the pointer. Use
the following procedure to connect a PS/2-style mouse to
the system. The Plug and Play feature allows you to do this
with the system powered on, but in Suspend mode.
1.
Check that the Versa is in Suspend mode.
CAUTION: Make sure the Versa is in Suspend
mode or powered off whenever you add or remove
a mouse. Doing so with the power on in Active
mode may damage the system.
2.
Open the left-rear cover of the system.
3.
Connect the mouse cable connector to the key-
board/mouse port on the system. (The keyboard/mouse
port is the first one.)
3-18 Adding Options
Connecting an external mouse
Advertisement
Table of Contents
