Closing The Lcd Panel; Connecting The Ac Adapter - NEC VERSA P Manual

2. Position the LCD panel to a comfortable viewing angle.
You can open the screen to an angle of 180 degrees.
NOTE: Do not attempt to change LCD panels while
system power is on.
You can, however, reverse the panel so it faces the
other way while system power is on but in Suspend
mode.

Closing the LCD Panel

To close the LCD panel, simply lower the panel over the
keyboard. Press down until the latch catches to secure the
LCD panel.

Connecting the AC Adapter

Connect the AC adapter to your computer as follows.
Insert the adapter's DC cable into the power connector
1.
port on the back of the system.
1-6 Getting to Know Your New Information Tool
Power Connector
Port
The power connector