Table of Contents
Advertisement
MESSAGE
Invalid configuration
information – run
Setup program
Real time clock
failure
Time-of-day not set –
run Setup program
Fixed disk
configuration error
Fixed disk failure
Fixed disk controller
failure
Keyboard clock line
failure
Keyboard data line
failure
POST Error Messages
WHAT TO DO
One or more system configuration parameters
are not properly set. Start Auto Setup, set
them correctly, and exit and save to update
the parameters.
Set time and date using Auto Setup. Exit and save
to update the parameters.
Set the time and date using Auto Setup. Exit and
save Setup to update the parameters.
Start Auto Setup. Exit and save to update the
parameters. Check to see if the hard disk connector
is seated properly. If there is still a problem, the
hard disk might need repair.
Press F1 to start Auto Setup. Exit and save to
update the parameters.
Check to see if the hard disk connector is seated
properly.
If there is still a problem, the hard disk might
need repair.
Press F1 to start Auto Setup. Exit and save to
update the parameters.
Check to see if the hard disk connector is seated
properly.
The hard disk controller does not work and might
need repair.
Unplug external keyboard if attached. Have the
keyboard repaired.
Unplug external keyboard if attached. Have the
keyboard repaired.
Problem Solving 6-5
Advertisement
Table of Contents
