Install New BIOS
This menu option first saves the system's original BIOS to
the diskette and then installs the new BIOS. Be sure to
choose the Customize BIOS feature, if desired, before
selecting this option. After the installation is completed, it
resets the system to enable the new BIOS.
When you select this function, a message similar to the
following one appears.
Press
Y,
similar to the following is displayed.
Then,
C-10 Using the BIOS Update Utility
This procedure will install the new
BIOS in your system.
After the new BIOS is installed, your system
must be power cycled.
Enter "Y" to continue [N]
Note: Your current BIOS will be saved if a copy
of it does not already exist on this disk
Warning: Do NOT disturb the system while
update procedure is in progress.
then press
Enter
. After a brief pause, a message
Saving data files, please wait...
Please remove any diskette in drive A:
Press any key to continue...