Keyboard/Mouse - NEC VERSA VX Manual

Keyboard/Mouse

You can add a full-size PS/2-style keyboard or PS/2-style mouse to your NEC Versa
using the Plug and Play feature. The PS/2 style keyboard and the PS/2 style mouse are
warm insertable allowing you to connect the devices while the NEC Versa is powered
on. You can continue to use the system keyboard and VersaGlide touchpad while an
external keyboard or mouse is connected.
Note
connected, refer to, "How to Use BIOS Setup," in Chapter 3. The PS/2 Mouse
parameter in the Advanced CMOS Setup section of the BIOS Setup parameters allows
you to enable or disable the VersaGlide touchpad.
To attach both an external keyboard and an external mouse at the same time, use the
optional NEC Y-adapter. For ordering information, contact your NECC dealer.
Note
NECC office or their dealers for ordering information.
Reference the booklet, "Getting Services and Support in Asia, Australia, and Europe" to
find out how to contact the local office in your country.
To connect an external keyboard or mouse simply put the system into a suspended
state, connect the device to the keyboard/mouse port, then resume the system when the
connection is secure. You are now ready to use your external keyboard or mouse.
For information about disabling the VersaGlide while an external mouse is
If you purchased this product outside the U.S. or Canada, contact the local
Connecting an external keyboard/mouse
Using External Devices 8-5