Power Button, Microphone Assembly, Keyboard; Removing The Power Button, Microphone Assembly, Keyboard - NEC VERSA 6060 Service Manual

4-12 Field Service Guidelines

Power Button, Microphone Assembly, Keyboard

Remove the Power button, microphone assembly and/or keyboard as follows.
1. Remove the LCD and top cover as previously described.
The Power button is held in place primarily by the computer's top cover. Once the
2.
top cover is removed, just lift the Power button out of its retaining inserts.
Remove the microphone assembly as follows.
3.
T
Locate the microphone assembly cable that attaches to connector P3 on the
audio board. Use a flat-head screwdriver to disconnect the cable from the
audio board.
T
Slide the microphone assembly forward and remove from the unit.
Figure 4-9 Removing the Power Button, Microphone Assembly, Keyboard