Change User Password; Change Supervisor; Auto Configuration With Defaults; Save Setting And Exit - NEC VERSA 6060 Service Manual

T
Docking Station Joystick
Adjusts the parameter to Disabled, Auto, or Plug and Play Operating System as
needed.

Change User Password

You must set the Supervisor password first. Then you can set the user password. You can
have a supervisor password without having a user password. This gives the system a second
level of password security.
Change Supervisor Password
Sets a Supervisor password at system startup.

Auto Configuration with Defaults

Loads or cancels default settings.
Save Settings and Exit
Accepts changes made to current, or default settings and exits Setup.

Exit Without Saving

Reverts to the previously selected settings and exits Setup.

Using Setup to Set Power Management

As you have seen in this chapter, Setup allows you to use the factory set power savings
level (Longest Life), or choose between High Perform, Custom, or Off. Each provides a
special value to your current work effort. These power management levels have been de-
signed with you in mind. For example, you can use them under the following circumstances:
T
Longest Life — Provides best battery life and good performance. Use while trav-
eling long distances.
T
High Perform — Provides best performance and good battery life. Use while on
the road, traveling short distances.
T
Custom — You decide! Set power management levels according to your own
needs and present environment.
T
Off — Office environment, using AC power.
See the online documentation in the Windows NEC Information group under the NEC
Versa 6060 Help Center for a more detailed discussion of Power Management. See the fol-
lowing section for information on how using the special Save to File (STF) feature can
benefit you.
Setup and Operation 2-29