Accessing Setup; With An Error At Post; With No Errors At Post; Setup Utility Main Menu - NEC VERSA 6060 Service Manual

2-20 Setup and Operation
T
sets date and time
T
signals any hardware discrepancies during POST via error messages
T
verifies that any optional memory that you installed was installed correctly
T
integrates user defined security features.

Accessing Setup

To access Setup, press

With an Error at POST

You will need to use the Setup utility if the system detects an error during POST, it
prompts you with double beep sound and a message: "Press <F1> to Run SETUP."

With No Errors at POST

To enter Setup when no error message is displayed during POST, press
prompt appears.

Setup Utility Main Menu

After you press , the system displays the Setup Main Menu screen, similar to the follow-
F2
ing.
Use the up and down arrow keys (located on the lower right corner of the keyboard) to
toggle through the Setup menu items.
F2 at the power-on prompt
AMIBIOS HIFLEX SETUP UTILITY - VERSION 1.05
(C)1996 American Megatrends, Inc. All Rights Reserved
Standard CMOS Setup
Advanced CMOS Setup
Power Management Setup
Peripheral Setup
Change User Password
Change Supervisor Password
Auto Configuration with Defaults
Save Settings and Exit
Exit Without Saving
Standard CMOS setup for changing time, date, hard disk type, etc.
Figure 2-13 Setup Main Menu
when the
F2