Cd Loading - NEC VERSA 2600 User Manual

T
Auto Vibration Prevention Mode Switch — accessible
with CD drawer open and no CD inserted. When this
switch is on, the drive detects unbalanced CD and
changes its rotational speed in order to reduce drive vi-
bration.

CD Loading

To insert a CD into the CD-ROM reader, follow these
steps.
NOTE
restraint installed. Remove the restraint by lifting on
the plastic edge near the center hole. Do not insert
a CD with the restraint installed.
Press the release button and pull the CD tray out of the
1.
reader bay.
Put your CD, printed side up, into the circular impres-
2.
sion in the tray.
Push the CD tray in until it clicks shut.
3.
NOTE
not affect CD-ROM reader functioning.
4-10 Using Your NEC Versa
The CD-ROM reader ships with a shipping
Some CDs vibrate when playing. This does