Installing Memory Modules - NEC VERSA 2600 User Manual

Push the new hard drive all the way into the bay, until
2.
the front of the new hard drive is flush with the front of
the NEC Versa 2600.
Pivot the latch down, then slide up, until it snaps close.
3.
After you install the drive, you may need to go into
4.
Setup to specify your new drive type.

Installing Memory Modules

Your NEC Versa comes standard with 16 megabytes (MB)
of Extended Data Out (EDO) memory. This new technology
gives your system higher performance. You can increase
system memory to a maximum of 80 MB by installing two
double inline 32-MB memory modules (DIMM) in the sys-
tem.
The following module capacities are available:
T
8-MB memory module
T
16-MB memory module
T
32-MB memory module.
4-24 Using Your NEC Versa
Hard Drive
Insert hard drive