How To Use Laplink - NEC VERSA 2600 User Manual

How to Use LapLink

Follow these steps to get started using LapLink. Once you
have LapLink up and running, refer to the LapLink online
help for more information.
Start LapLink as follows:
1.
T
In Windows for Workgroups, locate and double click
the LapLink group icon. Select Laplink for Win-
dows.
T
In Windows 95, press
grams, and locate the LapLink for Windows 95
folder. Highlight the LapLink line and press the Ver-
saGlide selection button or tap the VersaGlide pad
once.
If you do not have a port enabled, LapLink prompts
you to enable one. Press
on-screen instructions to configure the port. Other-
wise, press
2. Once your ports are configured, select your communica-
tion method by pressing the appropriate button. The
buttons give you the following connection options.
T
Connect over cable
T
Connect over wireless
T
Connect over modem (if installed)
T
Connect over network
T
Connect over dial-up network
Once communication is established between systems, the
LapLink window is displayed.
Select the procedure you want to use by pressing one of
3.
the last three buttons in the LapLink toolbar at the top of
the screen.
2-8 Introducing the Software
, slide the cursor to Pro-
Start
to do so and follow the
Yes
.
No