NEC VERSA 2600 User Manual page 105

NOTE
the appropriate printer driver through the Windows
Control Panel.
Follow these steps to connect a serial device to your NEC
Versa.
Check that both the NEC Versa and the device power
1.
are off.
Open the port cover on the back of the system and locate
2.
the serial port.
Align and connect the 9-pin connector with the serial
3.
port on the system. Secure the connection with the
screws provided.
4-32 Using Your NEC Versa
When you connect a printer, be sure to install
Serial
Port
Serial
Device Cable
Connecting a serial device