Using Keys; Checking/Setting System Parameters - NEC VERSA 2600 User Manual

T
Item-Specific Help Area
The bottom of the screen describes the highlighted sys-
tem configuration parameter and the available settings
for that parameter.

USING KEYS

The following table lists Setup keys and their functions.
KEY WHAT IT DOES
Alt Activates the menu bar, by highlighting Startup.
Scrolls, left or right, along the menu bar, and highlights the
current menu selection
Enter or Opens the currently highlighted menu or parameter item. After
Spacebar
highlighting a selection with the
Spacebar to select a highlighted parameter setting. Use the
Spacebar or Enter for OK or Cancel.
Home/End Moves to the first/last parameter of the currently open drop-
down screen.
Moves the cursor up or down among the parameters on a
drop-down menu.
Tab For some parameter settings, moves the cursor between the
subfields. For example, for Startup / Date and Time, Tab
moves the cursor from day to month to year to hour to minute
to second, and to the OK and Cancel options.
Esc Closes the current window or drop-down screen, de-activates
the menu bar, or closes the Setup system configuration utility.

Checking/Setting System Parameters

See the following table for a list of parameters, their factory
default settings, and alternate settings. As you set each pa-
rameter, its available settings are explained in the Item-
Specific Help in the bottom of the screen.
3-4 Using Setup and Power Management
Setup Key Functions
arrows, use the