NEC VERSA 2600 User Manual page 23

T
Expansion Memory (RAM) Sockets — Pop open the
protective cover to access two expansion RAM double
inline memory module (DIMM) sockets. Up to 64 MB
of RAM may be added to the standard 16 MB of RAM
that comes with the system, for a maximum total RAM
of 80 MB.
DIMMS must be added in pairs. When adding
memory always use DIMMS of the same capacity.
DIMMS with different capacity that are installed to-
gether will not work properly.
T
Battery Bay — Location of removable battery pack.
T
Reset Switch — This recessed switch lets you restart
your system. Use a pointed object, like a straightened
paper clip, to push in the Reset button. Use this button
only if your system hangs up, fails to respond to key-
strokes, or fails to respond to the Power button.
T
Legs — Drop down the two support legs, and tilt your
NEC Versa forward for more comfortable keyboard op-
eration.
T
Battery Release Latch — Lets you remove the battery
pack installed in the battery bay.
1-12 Getting Started
!
CAUTION