How To Enter Setup; How To Use Setup; The Setup Screen - NEC VERSA 2600 Service Manual

Setup Utility

How to Enter Setup

Access Setup immediately after you power on your Versa 2600, during boot up. Just press
the Fn and Esc keys simultaneously when the following prompt appears.
<Fn - Esc> to enter System Configuration Utility
When you press Fn Esc
parameter settings.

How to Use Setup

The following sections describe how to use Setup, including these topics:
T

The Setup Screen

T
Using keys
T
Checking and setting system parameters.
The Setup Screen
The Setup screen looks similar to the one following and has five separate areas.
Menu Bar
SystemSoft SCU
Startup Components
System Information
Hard Drive
Current Display
LCD type
Battery Remain
Password
Press <Alt> key to activate menus, and cursor keys to navigate. Spacebar or
<Enter> keys accept menu item. <Esc> key cancel current action.
Item Specific Help Area
NOTE
The key is located on the lower-left
Fn
of the NEC Versa 2600 keyboard. The
is located on the upper-left of the NEC Versa
2600 keyboard.
and enter Setup, the system automatically displays current system
Security Key Power Miscellaneous
System
CPU Type
: 1031 MB
CPU Clock
: LCD
: TFT (800x600)
: 54%
: Disable
Memory
Base
Extended
Total RAM
Cache (Ext)
Setup and Operation
key
Esc
Nov 18, 1996 12:25:23 pm
Exit
= Pentium
= 133 MHz
= 640 KB
= 15360 KB
= 16384 KB
= 256 KB
2-17