Section 2 Setup And Operation; Unpacking The System; Hardware Setup; Ac Adapter - NEC VERSA 2600 Service Manual

Section 2
Setup and Operation
This section provides setup and operation information for the NEC Versa series system
(including cabling, power-on verification and using the Setup utility, from this point on re-
ferred to as "Setup" only).

UNPACKING THE SYSTEM

Find an area away from devices that generate strong magnetic fields (electric motors,
transformers, etc.). Place the shipping carton on a sturdy surface and carefully unpack the
system. The carton contents include the system, AC adapter, AC power cord, battery, soft-
ware CDs, and user documentation.

HARDWARE SETUP

When connecting power and signal cables, do the following.
The power switch turns the system on or off. Press to turn it on; press again to
1.
turn it off.
Connect the AC adapter cable to the power port on back of the NEC Versa.
2.
NOTE
Always plug the AC adapter cord into an
easily accessible outlet.
LED
AC
Power Cable
Figure 2-1 AC Adapter
AC
Power Port
AC
Adapter