Setup Utility; How To Enter Setup - NEC VERSA NOTE Manual

Setup Utility

Your NEC Versa Note system comes with a hardware configuration
program called Setup that allows you to view and set system parameters.
Setup also allows you to set password features that protect your system
from unauthorized use.
Use Setup to:
T
set the current time and date (you can also set the date and time
through Windows)
T
customize your operating system to reflect your computer hardware
T
secure your system with a password
T
balance your performance needs with power conservation.

How to Enter Setup

Access Setup at power-on. Just press
<F2> to Enter Setup."
When you press
Self-Test (POST) and displays the current CMOS RAM settings.
If the system detects an error during POST, it prompts you with a double
beep and a message: "Press <F1> to resume." If you press
may enter setup to allow you to correct the error. If you want to fix the
error, carefully read the error message that appears above the prompt
(taking notes if you want). If the system does not enter setup, the
standard bootup procedure resumes.
3-2 Using Setup and Power Management
F2
to enter Setup, the system interrupts the Power-On-
F2
at the screen prompt "Press
, the system
F1