Heat Shield And Cpu Board; Removing The Heat Sink/Shield Subassembly - NEC VERSA 2600 Service Manual

Heat Shield and CPU Board

Removing the CPU board entails, first removing the heat sink and heat shield as follows.
Figure 4-6 Removing the Heat Sink/Shield Subassembly
1. Remove the following items
T
three screws securing the heat sink and heat shield
T
one screw securing the LCD ribbon cables to the heat shield
T
LCD ribbon cables (disconnect) from connectors CN5 and CN6 on the main
board.
NOTE
When disassembling the laptop keep
screws and stand offs with their proper
subassemblies to insure proper reassembly.
Field Service Guidelines 4-9