NEC VERSA 2600 Service Manual page 59

2-24 Setup and Operation
T
Good Performance
Provides high system performance and moderate power savings, by reducing CPU
clock speed to one-half of its maximum speed any time the CPU is not engaged
for eight seconds.
T
Maximum Performance
Sets system performance to a maximum and power savings to a minimum, by
running the CPU at full speed all the time.
T
User Setting Battery (the default setting)
Lets you input your choice of performance and power saving parameters. See
"Using Power Management," later in this chapter, for details.
AC and PCMCIA Operation
T
User Setting AC
Lets you set performance and power saving parameters for AC operation. Default
settings are for maximum system performance.
T
PCMCIA Power
Permits PC Card socket power to remain on while the system is in Suspend Mode
(see "Using Power Management.")
Miscellaneous
Use this drop-down menu to set the following parameters:
T
Low battery beep (default)
This parameter lets you know when battery power is low, by emitting a beep
once, when battery power falls to 10%, and
every 60 seconds, when battery power falls to 5%.
T
Wake Up Alarm
Lets you specify Resume time for your NEC Versa 2600 anytime of day from
Suspend mode
one time only or
everyday at the same time.
T
L2 Cache
Level 2 Cache speeds up your system's data processing time, and is enabled
(checked) by default.