Operating Controls; Panel Leds And Controls; Control And Switch Functions - NEC VERSA 2600 Service Manual

OPERATING CONTROLS

The following section describes system controls, the LEDs, and function keys.
Refer to Figure 2-7 to locate system controls and switches. Table 2-2 describes the con-
trols.
Microphone
Control
Status LEDs
Power LED
Power Button
Microphone
Hard Disk Drive Bay
Release Latch
Kensington Lock
Volume Control
Headphones
Microphone In
Line-out
Line-In
AC Port
Power
Button
Speaker
Battery Bay CD-ROM Reader
Figure 2-7 Panel LEDs and Controls
Table 2-2 Control and Switch Functions
Function
LEDs indicators show system status.
Lights green when the computer is powered on. Lights amber and
blinks at low battery levels.
Turns the system on when pushed. Turns the system off when pushed
to the right again.
Allows the user to record monophonic sound directly into the system
Push latch down to remove the hard disk drive installed in the system.
Enables the user to add an optional Kensington Lock to prevent
unauthorized use of the computer.
Controls the speaker or headphone volume.
Connects external headphones or speakers to the NEC Versa.
Plugging in headphones disables the built-in system speakers.
Connect to an external microphone for monophonic recording.
Plugging in an external microphone disables the built-in microphone.
Connect this port to a Line-in port on another audio system to play or
record.
Use a cable to connect to the Line-Out port on another audio system.
Use the power jack to attach the NEC Versa to a DC power source.
Setup and Operation
LCD Panel
LCD Brightness
Control
Status
LEDs
VersaGlide
Speaker
Hard Drive
Diskette Drive
2-11