Update Device - ADF Web HD67002 User Manual

User Manual CANopen / Modbus Slave
Document code: MN67002_ENG Revision 3.103 Page 19 of 23
Industrial Electronic Devices

UPDATE DEVICE:

Section "Update Device":
Insert the boot jumper (see figure 2).
In order to load the parameters after they are set, set the Com port you used for
update, then you must click the button "Execute update firmware" on the principal
window.
Figure 15: Update device procedure
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31