Invertek Drives elevator CORE Quick Start-Up Manual page 9

9 | P a g e
5.2. Product Layout
13
1 Power Supply Input Terminals
2 USB-C Port -Used to light up the drive display and allow drive programming and parameter viewing using a device with USB-C output
3 Optional Universal Encoder Module for closed loop operation
4 Motor Connection Terminals
5 RJ45 Port for Modbus RTU / CAN open / PC interface (NOT FOR ETHERNET!)
6 Digital Inputs/Outputs
7 Safe Torque-Off Inputs
8 Drive Serial Number and Rating
9 Digital, Analogue Inputs/Outputs
10 Motor Brake Control Output
11 Motor Contactor Control Output (Default Function)
12 Trip reset Button (In addition to terminal & network reset)
13 Input EMC Filter and Varistor Circuit to earth Disconnect
14 DC Link EMC Filter Circuit to earth Disconnect
15 Brake Resistor Connection Terminals (Only Connect brake resistor between +DC and BR)
16 Encoder Status LED's
17 QR Code for on-line support documentation
5.3. Encoder Module Layout
Red = Power on
Off = No power
Off = Module Inactive
Green = Healthy
Green Flashing = Error
Simulated Encoder Outputs
Brake Release Monitoring
Inputs / Additional Digital
Inputs
11
10
9
6
7
6
5
14
Encoder Connections
www.InvertekDrives.com
1
17
2
16
3
15
4
12
8