Invertek Drives elevator CORE Quick Start-Up Manual page 4

4 | P a g e
2. About this Document
This document is intended as a Quick Start Up instruction manual and does not cover all features and functions of the product, the Elevator
core reference manual is also available (Scan QR code on Front cover) which covers all features and functions in more detail.
2.1. Target Audience
The information detailed within this document is intended for those persons who will mechanically, and electrically install the
drive, and those who will program the drive.
2.2. Prerequisites
The Installer and user must have Read and understood this manual and other applicable manuals in their entirety before
proceeding.
2.3. Terminology
The word Drive or Variable Frequency Drive refers to this product, the Optidrive Elevator Core.
IM refers to Induction Motor.
Geared refers to Induction Motor.
PM refers to permanent magnet motor.
Gearless refers to permanent magnet motor.
2.4. Cyber Security
The overall system designer is responsible for ensuring that there is a maintained secure connection between the drive and any
network that could be prone to a cyber-attack, furthermore the overall system designer is responsible for applying appropriate
measures such as firewalls, data encryption etc..
Invertek Drives Ltd cannot be held responsible for any loss or damages regarding a Cyber Security breach.
2.5. Warranty
The manufacturer accepts no liability for any damage caused during or resulting from transport, receipt of delivery, installation
or commissioning.
The manufacturer also accepts no liability for damage or consequences resulting from inappropriate, negligent or incorrect
installation, incorrect adjustment of the operating parameters of the drive, incorrect matching of the drive to the motor,
incorrect installation, unacceptable dust, moisture, corrosive substances, excessive vibration or ambient temperatures outside
of the design specification.
The local distributor may offer different terms and conditions at their discretion, and in all cases concerning warranty, the local
distributor should be contacted first.
This user guide is the "original instructions" document. All non-English versions are translations of the "original instructions".
The contents of this User Guide are believed to be correct at the time of printing. In the interest of a commitment to a policy of
continuous improvement, the manufacturer reserves the right to change the specification of the product or its performance or
the contents of the User Guide without notice.
Copyright Invertek Drives Ltd © 2024
All rights reserved. No part of this User Guide may be reproduced or transmitted in any form or by any means, electrical or
mechanical including photocopying, recording or by any information storage or retrieval system without permission in writing
from the publisher.
This User Manual is for use with version 1.0 Control Firmware and 1.03 Power Firmware
Invertek Drives Ltd adopts a policy of continuous improvement and whilst every effort has been made to provide accurate and
up to date information, the information contained in this User Guide should be used for guidance purposes only and does not
form the part of any contract.
www.InvertekDrives.com